MadAss Bike - save $200 enter coupon code madass at checkout

FINANCING

HD HELMET CAM

Torque Converters for Gokarts and Minibikes

GTC Gokart Torque Converter for Tecumseh Engine

View Larger Image

Reg: $249.00

MEMORIAL DAY SALE: $224.00

IN STOCK

MFG: GTC Industries

Part No: 1002T / 218353A

IN STOCK, READY TO SHIP

PRODUCT OPTIONS

* denotes required field

Cover*

Belt Guard*

Extra Belt*

Chain Size*

Quantity:

Add to a new shopping list

Quantity Discounts

Quantity	Amount
2 to 3	$214.00
4 to 6	$204.00
7 to 9	$199.00
10 to 9999	$194.00

GTC TC2 Model 1002T TORQUE CONVERTER

forTECUMSEH ENGINE

3/4" Bore, #35 or #40/41 Chain, for Tecumseh 5 or 6hp Engines

GUARANTEED IN STOCK

If you have a Tecumseh 5 or 6hp Engine on your Gokart or Minibike, then

this GTC Model 1002T is the absolute best Torque Converter option for you.

Guaranteed Perfect Fit, Awesome Performance

The 1002T is specifically designed for the Tecumseh engine and comes standard with the larger mounting plate which will mount in the Fully Horizontal position on the Tecumseh engines

You can also install a GTC 1002 or 1003 on any 5 or 6 Horsepower Tecumseh engine however, it will come with the smaller mounting plate

With both Tecumseh and Comet out of business, many owners of US made gokarts and minibikes could find themselves with a shortage of replacement parts. Fortunately, GTC has stepped up to the plate in offering this premium Torque Converter specifically designed for the Tecumseh engine and found on products like

Kenbar
Manco
Yerf Dog
Kartco
Carter
Trailsport Buffalo
TrailMaster
Little Bad Ass

and many many more. This 1002T will breath new life into your Gokart or Minibike

Amazing Take-off Power and Speed for your Gokart or Minibike.

Torque Converters dramatically improve Take Off Power, Acceleration, Climbing Ability and Top End Speed on Gokarts, Minibikes and other Small Vehicles. Vehicles currently using a Centrifugal Clutch can easily upgrade to a TC2 Torque Converter

Bench Test Video

QUALITY ASSURANCE TESTING:

GokartsUSA's initial testing of the GTC Torque Converter proved highly successful. The TC2 was road tested on a Little Bad Ass Minichopper with a 5hp Tecumseh Engine. The TC2 model 1002 was used which has a 3/4" Bore and #40/41P Chain. The performance impressed our technicians. The low end power and torque was strong enough to raise the front wheel with just barely applying the throttle. Take off and acceleration was also remarkably impressive. Taking on a steep hill from a complete stop, the TC2 smoothly down shifted and pulled the 200 pound rider up the hill with ease. On level ground, at maximum throttle, the TC2 shifted into a very high overdrive ratio and gave us an impressive top speed of 52mph from this stock 5hp Tecumseh. All in all, the TC2 performed significantly better than the stock TAV2* the bike originally came with.

*Note: COMET and TAV2 are trademarks of Certified Parts Corporation. GTC Industries is not affiliated or associated with Certified Parts or its products in any way

NOTES:

TC2 1002 Replaces Comet* 218353A TAV2* 30-75 Torq-A-Verter which is no longer manufactured

INCLUDED:

The TC2 Torque Converter is a complete kit that includes both drive and driven clutches, belt, billet aluminum engine mounting plate with a built in jackshaft and sprocket, all hardware and installation instructions

MODELS:

Four TC2 Kit Models Available

1001 3/4" Bore, #35 Chain
1002 3/4" Bore, #40/41 Chain
1003 1" Bore, #35 Chain
1004 1" Bore, #40/41 Chain

ENGINES:

TC2 Bolts onto most engines with a horizontal shaft including:

Briggs
Robin
Tecumseh
Honda (and clones)
Kohler
Clinton
Lifan

High Performance

The TC2 is a High Performance asymmetrical torque converter system in which the sheave faces have different angles. The system operates with the torque sensing cam in an outboard position allowing for in-line operation of the unit. The primary benefit of this design is that it allows proper alignment of the final drive chain to be on the same side of the vehicle as the torque converter. Moreover, the angle on the movable sheave being set at 18 degrees enables the unit to raise the belt to a larger pitch diameter with less travel of the sheave. This allows the unit to achieve higher overdrive ratios at maximum RPM

· In-Line Operation

· Powerful Low Ratio

· Smooth Shifting on Load Demand

· Infinite High / Low Ratios

· High Performance Overdrive

OPERATION OF THE TC2

The TC2 provides Neutral engagement at Engine Idle. At 2200 RPM, the system engages for a Powerful Low Ratio for great takeoff speed. At Mid Range, the TC2 instantaneously shifts ratios based upon RPM and Load Requirements. Finally, the High Performance Overdrive engages for maximum speed

TC2 Drive and Driven Units

Parts

PART#	DESCRIPTION	COMET#
1001	TC2 Torque Converter 3/4" Bore, #35P, 12T	218352A
1002	TC2 Torque Converter 3/4" Bore, #40/41P, 10T	218353A
1003	TC2 Torque Converter 1" Bore, #35P, 12T	218354A
1004	TC2 Torque Converter 1" Bore, #40/41P, 10T	218355A
1005	DRIVER UNIT 3/4"	203814A
1006	DRIVER UNIT 1"	203603A
1007	DRIVEN UNIT 5/8" BORE	217610A
1008	DRIVER MOUNTING BOLT 3/4" CRANKSHAFT	205384A
1009	DRIVER MOUNTING BOLT 1" CRANKSHAFT	215732A
1010	LOCK WASHER, 5/16	200701A
1011	PILOT WASHER 3/8	200840A
1012	PILOT WASHER 5/16	202429A
1013	DRUM DRIVER 3/4"	202090A
1014	DRUM DRIVER 1"	202427A
1015	HUB DRIVER 3/4" 4 SPLINED	203376A
1016	HUB DRIVER 1" 8 SPLINED	203641A
1017	DRIVER WEIGHT ASSY W/SPRINGS	200344A
1018	BLUE GARTER SPRING SET OF 2	011188A
1019	SHEAVE MOVABLE HALF W/HUB 3/4" BORE	200410A
1020	SHEAVE MOVABLE HALF W/HUB 1" BORE	203515A
1021	BUSHING BRONZE (NOT USED ON 1")	200349A
1023	BELT, ASYMMETRIC	203589A
1024	SHEAVE STATIONARY 3/4" BORE	202066A
1025	SHEAVE STATIONARY 1" BORE	206633A
1026	SPACER STEEL 3/4"	200389A
1027	SPACER STEEL 1"	202877A
1028	JAM NUT	203189A
1029	SNAP RING	204714A
1030	FIXED CAM	215650A
1031	SPRING GREEN	215699A
1032	FACE MOVEABLE WITH CAM	215647A
1033	BUTTON INSERT	204332A
1034	BUSHING	203942A
1035	FACE FIXED WITH POST 5/8" BORE	217612A
1036	KEY 3/16" SQ x 2-1/4"	209831A
1037	KEY 3/16" SQ x 9/16"	011059A
1038	JACKSHAFT, 5/8" DIAMETER	212225A
1039	WASHER 5/8"	200834A
1040	SPROCKET 12T 35P	200379A
1041	SPROCKET 10T 40/41P	102168A
1042	BALL BEARING SEALED 5/8"	215558A
1043	SPACER 5/8"	203187A
1044	SNAP RING FOR 5/8" SHAFT	212227A
1045	MOUNTING BRACKET W/BEARINGS AND SPACER	218525A
1046	ENGINE MOUNTING BOLT	217867A
1047	LOCK WASHER 5/16"	200701A
1048	SHROUD PLASTIC W/DECALS	218351A
1049	SCREW, SHROUND MOUNTING	214146A
1050	ROUND DECAL	218513A
1051	LONG DECAL	218514A

WARNING: Serious injury or death can result from improper installation or operation of this product. Children under the age of 16 should not operate vehicles with this product installed. Do not operate the TC2 without a cover, chain and belt guard device designed specifically for your vehicle (not supplied). Long hair or loose clothing can become entangled with moving parts and cause serious injury or death. Engines and moving parts can become hot and cause burns. By ordering this product, the purchaser accepts all risks associated with installation and operation of this product