|
|
|
Home
Heist Bobber LED Fender Mount Black Tail Light with lic plate mount
LED Taillight will directly bolt onto tha Heist with no modifications. This tail light is also designed to fit well on many bobbers, choppers, cafe bikes and just about any custom out there. Mounts easily with 2 supplied nuts and bolts.The LED's are extra bright, 3X brighter then standard 12 volt bulb
MFG: Cleveland Cyclewerks
Part No: HB08
PRODUCT ASSEMBLY
Unless GokartsUSA performs setup, Customer is responsible for setup including but not limited to uncrating and installing/checking the wheels, seats, roll bars, hooking up the fuel line, battery and lights, checking tightness of all nuts and bolts, changing oil, etc. Although we do provide some very good information on our website, occasionally some units may need other routine items checked/adjusted such as cleaning and adjusting the carburetor and fuel tank, checking to ensure wires are well connected, adjusting chain slack and alignment, if needed. Since you are skipping a dealer and saving over half the price of a usual retail customer, your mechanic will need to perform the final assembly (as stated above). This will take generally 2-6 hours or more to perform depending on the product and skill level. While we will gladly assist you with any technical questions, support we can give over the telephone is limited. In addition to information which may be supplied by the manufacturer and delivered with the product, click here to see our suplemental Product Setup Guides
WARRANTY INFO
Some products come with a 3 month parts only warranty from the manufacturer. There are no returns or exchanges for any reason. The warranty does not include parts worn by standard use (such as tires, belts, clutches, chains, etc.) or parts damaged from use, accidents, abuse, or misuse of the product. Labor is not covered for any reason. Gokarts USA will assist the customer in obtaining warranty coverage from the manufacturer. Customer may be required to ship the defective or damaged part to manufacturer first before a replacement will be sent. Buggies are sold warehouse direct in a crate and are not delivered ready to ride. Customer is responsible for product setup and final assembly, which must be performed by qualified mechanic. We cannot refund or exchange your product if you cannot perform these functions or refuse to let a shop do it for you. See the order terms posted on our website and printed on your invoice for full information. click here to see the Order Terms before placing an order
WARRANTY CLAIMS
It is the customer’s responsibility to register products for warranty within 5 days of delivery. The Pre-Delivery Inspection form (PDI) must also be completed as required by all dealerships in the USA. This is a REQUIRED step in the Assembly Process. By not doing this step you will be VOIDING your warranty. Please click here for full warranty information Warranty Registration, PDI and Claim Form
Reg: $29.00
GET READY FOR SUMMER SALE: $19.00
A simple product needed if you replace 12 volt (Standard Turn Signals) with LED turn signals. The resistance is lower for LED lighting causing the turn signals to blink fast, these resistors help restore the normal speed of the flasher
|
Reg: $29.00
GET READY FOR SUMMER SALE: $24.00
diecut sticker pack. 3 high quality diecut Cleveland CycleWerks Stickers. These stickers will last a long time outside, on your bike, car, etc
|
Reg: $42.00
GET READY FOR SUMMER SALE: $35.00
These shocks come with adjustable pre-load to soften or stiffen the ride. Length 4.74" end to end. Length 3.9" center hole to center hole. Width 1" mount hole.
|
Reg: $54.00
GET READY FOR SUMMER SALE: $39.00
These LED turn signals are small, but are much brighter then most standard OEM motorcycle turn indicators. Measuring 2" across the lens area, these lights give a custom, but unobtrusive look. Grade 8 Chrome, and a classic look for your bike
|
Reg: $47.00
GET READY FOR SUMMER SALE: $39.00
On tha Heist this piece is for looks only, as it hits the stock exhaust if you try to kick it over. It is for looks only at the moment, unless you are running an aftermarket exhaust. Shit on us, we never planned on offering this bike with the kick starter
|
Reg: $59.00
GET READY FOR SUMMER SALE: $42.00
These are your traditonal seat springs, they directly bolt onto just about any solo bobber seat, and were specifically designed for our Speed Stitch Solo Seat. Length 4.6" X Width 1.7"
|
Reg: $89.00
GET READY FOR SUMMER SALE: $45.00
Cat Eye Taillight will directly bolt onto tha Heist with no modifications. This tail light is also designed to fit well on many bobbers, choppers, cafe bikes and just about any custom out there. Mounts easily with 2 supplied nuts and bolts
|
Reg: $87.00
GET READY FOR SUMMER SALE: $63.00
Chrome LED Taillight will directly bolt onto tha Heist with no modifications. Also designed to fit well on just about any custom out there. Mounts easily with 2 supplied nuts and bolts.The LED's are extra bright, 3X brighter than standard 12 volt bulb
|
Reg: $95.00
GET READY FOR SUMMER SALE: $77.00
Made in Cleveland Ohio, this is an American thread style gas cap and will fit on all tanks that have an American thread. A pretty simple vented gas cap, with breather valve so gas will not splash out of the tank. O-Ring is included
|
Reg: $159.00
GET READY FOR SUMMER SALE: $99.00
This seat is made from a stamped steel seat pan that is powder coated. On top of the steel seat pan is a molded, closed cell medium density foam. The seat cover is hand stitched and pleated vinyl cover backed with plus padding
|
Reg: $159.00
GET READY FOR SUMMER SALE: $129.99
Often called an "Alien Head" tank, its narrow with no flat in the center and round all the way across the center, 21 gallon, and features a cam-lock fuel filler. Near the back of the tank, there are 2 1/4: NPT threads to accept those old-school petcocks
|
Reg: $188.00
GET READY FOR SUMMER SALE: $149.00
Chrome Axle Mount LED tail light / license plate combo adds a little custom detail to any bike. This license plate mount is horizontal and legal in many states. The LED's are extra bright, 3X brighter then standard 12 volt bulb
|
GET READY FOR SUMMER SALE: $150.00
Standard vinyl wrap and stitch is $150. Custom seats can be specified with specification from you on exact colors, stitching, pleating, location
|
Reg: $219.00
GET READY FOR SUMMER SALE: $179.00
Made in the USA, these bars are a thick .120 wall. The risers are also a very beefy 3/8" laser cut mild steel bare knuckle design. Powder coating is thick, and we left the throttle side bare, so the powder coating does not effect throttle actuation
|
Reg: $349.00
GET READY FOR SUMMER SALE: $229.00
for builders who want a pre-engineered solution that can simply weld onto just about any bike. Everything is contained within the housing for a very nice custom look. We use internal ball bearing races, which are far superior to the standard brass bushing
|
Reg: $289.00
GET READY FOR SUMMER SALE: $239.00
The G&D Exhaust for the Heist is made from Stainless Steel and directly bolts onto the bike with the existing bolts. This exhaust was dyno tuned for performance and sound. comes with removable baffles, so the customer can tune the sound just right
|
Reg: $289.00
GET READY FOR SUMMER SALE: $239.00
The G&D Exhaust for the Heist is made from Stainless Steel and directly bolts onto the bike with the existing bolts. This exhaust was dyno tuned for performance and sound. comes with removable baffles, so the customer can tune the sound just right
|
Reg: $329.00
GET READY FOR SUMMER SALE: $279.00
Made in the USA, this airbag suspension is a direct bolt-on part for tha Heist. The brackets are thick 1/4" powercoated steel, that are laser cut for percesion. The airbag is a Goodyear piece, that we hook up to brass compression fittings
|
GET READY FOR SUMMER SALE: $3,195.00
DISCONTINUED Tha Heist Bobber 250 is an amazingly high-quality, American Designed small-displacement bike, delivered at a price anyone can afford. The everyman's chopper. Fully Assembled, CARB Approved for California, STREET LEGAL
| |
|
Honda GX160/200
|
|