MECHANIC: If you are a new enthusiast, welcome to the exciting world of
Powersports. You should know that powersport products require substantial
mechanical support to uncrate, setup, adjust, maintain, repair and upgrade.
This support is required on an ongoing basis. These activities apply to a used
product as well as an item brand new out of the box. We strongly recommend
that a qualified mechanic perform the setup and all other mechanical
operations to keep you product operating properly and safely. Gokarts USA does
not provide mechanical services and labor is not covered under manufacturer's
warranty under any circumstances. Additionally, manufacturers may require
proof that a product was setup by a qualified mechanic in order to provide
warranty coverage.
If customer elects to perform the setup, then a
PDI (Pre-delivery Inspection) and Full Maintenance MUST be completed by
customer prior to issuance of MSO Title. This step is required by all
Dealerships in the USA. Failure to perform and submit the PDI will void the
Warranty.
WARRANTY:
All Vehicles come with a 90 day Limited Warranty from the
Manufacturer. Optional Extended Warranties are available. No warranty, express
or implied is provided by Gokarts USA. Any warranty offered by a manufacturer
is from that manufacturer and not from GokartsUSA. GokartsUSA will assist any
customer should a warranty issue arise. For products whose manufacturer offers
a warranty, that warranty shall cover defective Parts Only and not labor.
Warranty does not cover shipping. All warranty procedures that the
manufacturer requires must be followed, no exceptions. Any part or accessory
that is covered by a warranty MUST be returned to the manufacturer for
inspection BEFORE an exchange can be issued. Customer pays for shipping of
parts to and from the manufacturer. Contact GoKartsUSA for details and further
instructions if you think you have a warranty situation BEFORE you do
anything. Any warranty that comes with a vehicle spells out the warranty and
time periods. If you have any questions call GoKartsUSA and we will help with
the warranty.
HELP REQUEST:
Many routine requests can be handled in the
Customer Service
section of our website. If you feel you may have a support or warranty
situation, please complete a Help Request in the customer service section of
our website. Follow the instructions completely and give us a call after you
submit your Help Request. Please note, no action will be taken on your help
ticket until you call us.
I was looking at the kikker but after reading so many complaints, decided to get the heist. I'm very glad I did. The quality is everything they say is is. The stock exhaust is very quiet so I got the performance short exhaust. Much better sound. Every body has to stop and check it out
A simple product needed if you replace 12 volt (Standard Turn Signals) with LED turn signals. The resistance is lower for LED lighting causing the turn signals to blink fast, these resistors help restore the normal speed of the flasher
These shocks come with adjustable pre-load to soften or stiffen the ride. Length 4.74" end to end. Length 3.9" center hole to center hole. Width 1" mount hole.
These LED turn signals are small, but are much brighter then most standard OEM motorcycle turn indicators. Measuring 2" across the lens area, these lights give a custom, but unobtrusive look. Grade 8 Chrome, and a classic look for your bike
On tha Heist this piece is for looks only, as it hits the stock exhaust if you try to kick it over. It is for looks only at the moment, unless you are running an aftermarket exhaust. Shit on us, we never planned on offering this bike with the kick starter
These are your traditonal seat springs, they directly bolt onto just about any solo bobber seat, and were specifically designed for our Speed Stitch Solo Seat. Length 4.6" X Width 1.7"
Black LED Taillight will directly bolt onto tha Heist with no modifications. Also designed to fit well on just about any custom out there. Mounts easily with 2 supplied nuts and bolts.The LED's are extra bright, 3X brighter then standard 12 volt bulb
Cat Eye Taillight will directly bolt onto tha Heist with no modifications. This tail light is also designed to fit well on many bobbers, choppers, cafe bikes and just about any custom out there. Mounts easily with 2 supplied nuts and bolts
Chrome LED Taillight will directly bolt onto tha Heist with no modifications. Also designed to fit well on just about any custom out there. Mounts easily with 2 supplied nuts and bolts.The LED's are extra bright, 3X brighter than standard 12 volt bulb
Made in Cleveland Ohio, this is an American thread style gas cap and will fit on all tanks that have an American thread. A pretty simple vented gas cap, with breather valve so gas will not splash out of the tank. O-Ring is included
This seat is made from a stamped steel seat pan that is powder coated. On top of the steel seat pan is a molded, closed cell medium density foam. The seat cover is hand stitched and pleated vinyl cover backed with plus padding
Often called an "Alien Head" tank, its narrow with no flat in the center and round all the way across the center, 21 gallon, and features a cam-lock fuel filler. Near the back of the tank, there are 2 1/4: NPT threads to accept those old-school petcocks
Chrome Axle Mount LED tail light / license plate combo adds a little custom detail to any bike. This license plate mount is horizontal and legal in many states. The LED's are extra bright, 3X brighter then standard 12 volt bulb
Made in the USA, these bars are a thick .120 wall. The risers are also a very beefy 3/8" laser cut mild steel bare knuckle design. Powder coating is thick, and we left the throttle side bare, so the powder coating does not effect throttle actuation
for builders who want a pre-engineered solution that can simply weld onto just about any bike. Everything is contained within the housing for a very nice custom look. We use internal ball bearing races, which are far superior to the standard brass bushing
The G&D Exhaust for the Heist is made from Stainless Steel and directly bolts onto the bike with the existing bolts. This exhaust was dyno tuned for performance and sound. comes with removable baffles, so the customer can tune the sound just right
The G&D Exhaust for the Heist is made from Stainless Steel and directly bolts onto the bike with the existing bolts. This exhaust was dyno tuned for performance and sound. comes with removable baffles, so the customer can tune the sound just right
Made in the USA, this airbag suspension is a direct bolt-on part for tha Heist. The brackets are thick 1/4" powercoated steel, that are laser cut for percesion. The airbag is a Goodyear piece, that we hook up to brass compression fittings
DISCONTINUED Classic Cafe style with modern components and chassis, Tha Misfit 250 is an amazingly high-quality, American Designed bike, delivered at a price anyone can afford. Fully Assembled, CARB Approved for California
