|
|
|
American Sportworks Silver Streak Engine Replacement Kit
|
Reg: $389.00
MEMORIAL DAY SALE: $319.00
IN STOCK
MFG: Titan
Part No: TX160-SS
PRODUCT OPTIONS
* denotes required field
Engine*
|
|
SILVER STREAK
ENGINE REPLACEMENT KIT
sorry, this engine not available in California
The Silver Streak Gokart has been discontinued due to a defective engine. This kit will provide you with a 5.5hp Titan TX160 Powersport Engine, Engine mounting plate and Centrifugal Clutch. Use your existing chain.
NOTE: This engine is a little larger than the stock engine. Some components will need to be relocated and/or modified in order to install this engine. You will need to install the supplied engine mounting plate and move the axle sprocket.
KIT INCLUDES:
INSTALL NOTES:
Engine Mounting Plate (included). The engine mount must be moved to the right side of the kart. The new plate must be welded. The crankshaft of the new engine will now be on the left side of the engine. The axle sprocket must be moved to the left and aligned with the clutch sprocket. Some older models may not use #35 chain. If this is the case, you can order the 2555 Hub and the 2653 53 tooth #35 sprocket shown below
 VIDEO
FEATURES:
-
The engine fits in the minibike and gokarts we sell. Also, gas tank may be removed for installation in a custom minibike frame if you are using a separate gas tank.
-
This engine bolts right onto most go karts and mini bikes without any modifications. *3/4" diameter, 2-7/16" long keyed crankshaft. 14-3/4 Height.
-
Centrifugal Clutches and Torque Converters for 3/4" diameter crankshafts will fit this engine.
-
4 Tapped bolt holes around crankshaft. Our Torq-A-Verter kits will bolt up to this engine. Chain guards, etc...will also bolt to it.
-
Soft pull starter - less pulling effort required to start.
-
Set up with a throttle hookup and small return spring.
NOTE: This engine has a manual choke. The manual choke allows the engine to be started more easily under most conditions
|
|
Lawn Mower and Utility Engines from other suppliers may cause you to have unwanted problems such as these:
|
-
They may not have the proper throttle hookup for the throttle cable
-
The crankshaft may be the wrong length and a standard clutch will not fit
-
The side cover may not have a standard bolt pattern for adding chain guards, Torq-a-Verter kits, etc.
-
It may also be completely under-powered because of the RPM range of the engine
NOTE: If you are installing this engine on a minibike, this engine is 14" tall. Measure your minibike to make sure it will fit before ordering. If you are ordering this engine for use on one of our minibike kits (Road Rocket, 3540, 3541 or 3544) there may be an issue whereby the gas cap is difficult to remove. You will need to order and install the Minibike Gas Tank shown below. This Tank is not needed for installation on a gokart
|
| Model
|
|
TX160
|
|
|
| Engine type
|
|
4-stroke 25° inclined single cylinder
|
|
| Bore×Stroke
|
|
66mm × 45mm
|
|
|
| Displacement
|
|
163cc
|
|
|
| Compression ratio
|
|
8.5/1
|
|
|
| Horsepower
|
|
5.5HP/3600rpm
|
|
|
| Max. Torque
|
|
10.8Nm/2500rpm
|
|
|
| lgnition
|
|
Non-contact transistorized ignition(TCI)
|
|
| Starter
|
|
Recoil hand-operated
|
|
|
| Air cleaner
|
|
Semi-dry, oil bath, dual, double silent cyclone
|
|
| Fuel tank capacity
|
|
3.6 L
|
|
|
| Fuel consumption
|
|
290g/HP-hour
|
|
|
| Engine oil capacity
|
0.6 L
|
|
|
| Dimensions
|
L:12-3/4", W:11.0", H:14-3/4"
Crankshaft: 3/4" x 2-7/16"
|
|
|
| Dry weight
|
|
32 lbs
|
PERFORMANCE PARTS
Honda GX160 / 200 and clones
Upgrade your engine all the way up to 26 horsepower
-
Intake
-
Exhaust
-
Flywheel
-
Carburetor
-
Head
-
Valves
-
Cam
-
Crankshaft
-
Piston
-
Rod
|
|
|
|
Reg: $349.00
MEMORIAL DAY SALE: $209.00
|
|
|
ON SALE NOW FOR $209. 6.5hp GX200 Clone Powersport Engine CARB APPROVED fits our kits and can be used as a replacement engine for most Gokarts and Minibikes. 6.5hp, Recoil Start, Throttle Cable Hookup for Gokart or Minibike. Performance parts available
|
|
|
|
|
|
Reg: $295.00
MEMORIAL DAY SALE: $238.00
|
|
|
5.5hp GX160 Clone Powersport Engine fits our kits and can be used as a replacement engine for most Gokarts and Minibikes. Overhead Valves, Recoil Start, Throttle Cable Hookup. Performance parts available to boost horsepower up to 26hp
|
|
|
|
|
|
Reg: $497.00
MEMORIAL DAY SALE: $238.00
|
|
|
Titan GX160 Clone Stage 1 Powersport Engine fits our kits and can be used as a replacement engine for most Gokarts and Minibikes. Overhead Valves, Recoil Start, Throttle Cable Hookup. Performance parts available to boost horsepower up to 26hp
|
|
|
|
|
|
Reg: $49.00
MEMORIAL DAY SALE: $37.00
|
|
|
External Minibike Gas Tank. Some of the newer engines, including our Titan engines, are a little taller and it can be difficult to remove the gas cap. This tank solves the problem. Easy installation on our minibike kits. Small Plastic Tank
|
|
|
|
|
|
MEMORIAL DAY SALE: $39.90
|
|
|
Go Kart Sprockets. 40 to 114 teeth. These sprockets bolt onto the 2555 Uni-Hub. The Hub then fastens to a 1" Go Kart Axle. The 72 tooth sprocket is used on most Go Karts
|
|
|
|
|
|
Reg: $59.00
MEMORIAL DAY SALE: $47.50
|
|
|
5436C Honda / Clone Exhaust Curved Header exhaust pipe will wake up your Honda GX160 / GX200 or clone engine. Get on the throttle with this bolted on your motor and prepare for instant RPMs and acceleration. works great on our Titan engines
|
|
|
|
|
|
Reg: $29.95
MEMORIAL DAY SALE: $19.00
|
|
|
Air Intake kit includes optional Billet Aluminum Carb Intake Adapter, Angled Air Filter and mounting Clamp for your Honda GX160 / GX200 or clone engine. works great on our Titan engines
|
|
|
|
|
|
Reg: $59.00
MEMORIAL DAY SALE: $47.95
|
|
|
4100 Exhaust Silencer for Honda / Clone. Installs on RLV 5436C exhaust pipe. works great on our Titan engines
|
|
|
|
|
|
Reg: $9.50
MEMORIAL DAY SALE: $7.75
|
|
|
4140 Locking Collar fastens the 4100 Silencer to the 5436C exhaust pipe for use on your Honda or clone engine. Works great on our Titan engines
|
|
|
|
|
|
Reg: $19.95
MEMORIAL DAY SALE: $18.95
|
|
|
Stock Gasket Set for Honda GX160 5.5hp, GX200 6.5hp engines and clones. fits our Titan TX160 5.5hp and TX200 6.5hp Engines and clones
|
|
|
|
|
|
Reg: $59.00
MEMORIAL DAY SALE: $24.95
|
|
|
Our top plate/throttle mechanism is CNC machined from 1/8" aluminum plate so you know it looks great. The integrated throttle mechanism is adjustable to maximize foot pedal travel giving you more precise throttle control. Honda GX160/120 and clones
|
|
|
|
|
|
Reg: $47.00
MEMORIAL DAY SALE: $37.00
|
|
|
UNI Air Intake kit includes Billet Aluminum Carb Adapter, UNI Air Filter and mounting Clamp for your Honda GX160 / GX200 or clone engine. works great on our Titan engines
|
|
|
|
|
|
Reg: $190.00
MEMORIAL DAY SALE: $160.00
|
|
|
This is the ultimate lightweight 1.8lb performance billet flywheel to wake up your Honda GX160 / GX200 or clone engine. Get on the throttle with this bolted on your motor and prepare for instant RPMs and acceleration. works great on our Titan engines
|
|
|
|
|
|
Reg: $12.00
MEMORIAL DAY SALE: $7.95
|
|
|
The AR3910X spark plug is longer. This increases compression and can add as much as 3/4hp. A must have for your Honda, or clone. Convert your engine to Box Stock class. fits the 5.5 and 6.5hp engines Honda and clones. Works great on our Titan Engines
|
|
|
Product Reviews
|
Don't miss our Taco Minibikes - click here!
Honda GX160/200
KARTING HISTORY
|
|