|
|

|
3544 Minibike Kit, 10" Steel Wheels
|
Reg: $479.00
SUMMER MADNESS PRICE: $359.00
DISCONTINUED
PRODUCT OPTIONS
* denotes required field
Chain Guard*
Clutch Options*
Kickstand*
Quantity Discounts
| Quantity | Amount |
| 2 to 3 | $352.00 |
| 4 to 6 | $349.00 |
| 7 to 9 | $346.00 |
| 10 to 999 | $344.00 |
|
|
MINIBIKE KIT
MADE-IN-USA
10" Wheels, 17.5" Tires
D I S C O N T I N U E D by manufacturer Please see the Road Rocket Minibike kit with 8" Wheels
The photo above shows the kit with the 5 inch wheels, however,
This 3544 kit comes with the 10 inch wheels and 17.5 inch tires shown below:
See the VIDEO at the bottom of this page
This is one of the original Mini Bikes made since 1960
Remember the Old School Minibikes of the 60s? Like Taco and Rupp?
Those of you who grew up in the 60’s
Remember Minibikes as a wonderful part of childhood?
Boy's who were fortunate enough to own one couldn’t wait to get out of school and go down to the local field to ride
Painting and Assembly Required
One of the only Old School Mini Bikes still manufactured today!
|
COMPONENTS INCLUDED IN THIS KIT:
|
|
SPECS:
- Will accept a 2 to 6hp Engine
- 4 1/2" Internal Expanding Brake
- 10" Steel Wheels
- Front Tire: 350x10 17.5" Motorcycle Style
- Rear Tire: 350x10 17.5" Motorcycle Style
- #35 chain with master link
- Low cost, High Quality, MADE-IN-USA
- Rugged Construction
Ready to paint and assemble with basic hand tools
|
|
|
|
CLUTCH
You will need to select a Clutch for your Mini Bike in Product Options above. The 12 tooth clutch will give you a faster take off and lower gearing for climbing hills. The 13 tooth clutch will give you more top end speed
|
|
ENGINE
The Mini Bike Kit does not include an Engine unless you add one. After adding this Mini Bike Kit to your cart, you must scroll down to add an engine. (engine sold separately)
All of the engines shown below fit this frame and have a throttle cable adapter setup for minibikes. Not just any engine will work on a Mini Bike
|
|
CHAIN GUARD
Add a Chain Guard, Strongly Advised, in Product Options above
|
|
KICKSTAND
Add a Kickstand with weldable Mounting Bracket in Product Options above
|
|
|
GAS TANK: Most of the newer engines now have a larger gas tank and a much taller gas cap due to EPA requirements. On a Minibike, this can make it difficult or impossible to remove the gas cap. If you are ordering one of our minibike kits (Road Rocket, 3540, 3541 or 3544) we recommend installing the external Minibike Gas Tank shown below when using our Titan Engines. When using our Robin Engines, we recommend ordering the Low Profile Gas Cap. This is not an issue on a Gokart
See a Video of this Mini Bike
|
FUN TO BUILD
Has everything you need. Easy-to-follow Instructions included.
No Welding, just basic tools. it's Fun!
This is an excellent project for you or your family. Not only does it help teach mechanical basics, but you can also have the fun of riding it after you have said
"I built it myself!"
The kit includes everything you need except an engine and clutch. Add a Clutch and other add-ons in Product Options above. Then scroll down to add an engine if you need one.
No welding is required! Everything simply bolts together. The Frame & Forks come completely welded and are not painted, are made from thick-wall mild steel tubing.
The engines shown below fit this frame and have throttle cable adapter setup for minibikes.
|
ENGINE INFO: Not just any engine can be used on a Go Kart or Minibike. The engines shown below are factory designed to be used on Go Karts or Minibikes
|
|
Lawn Mower and Utility Engines from other suppliers may cause you to have unwanted problems such as these:
|
-
They may not have the proper spring-loaded throttle return for the throttle cable
-
The crankshaft may be the wrong length and a standard clutch will not fit
-
The side cover may not have a standard bolt pattern for adding chain guards, Torq-a-Verter kits, etc.
-
It may also be completely under-powered because of the RPM range of the engine
|
Select an Engine shown below
|
|
DISCLAIMER:
No warranty on kits. Kits are not returnable for any reason and no refunds will be issued. Customer is responsible for painting and assembly of kit. For safety reasons as well as proper operation, we strongly recommend that kits are assembled and/or inspected by a qualified mechanic or persons with appropriate mechanical expertise prior to operation. We cannot refund or exchange your kit if you cannot perform these functions or refuse to let a shop do it for you
|
|
|
|
|
Reg: $349.00
SUMMER MADNESS PRICE: $209.00
|
|
|
ON SALE NOW FOR $209. 6.5hp GX200 Clone Powersport Engine CARB APPROVED fits our kits and can be used as a replacement engine for most Gokarts and Minibikes. 6.5hp, Recoil Start, Throttle Cable Hookup for Gokart or Minibike. Performance parts available
|
|
|
|
|
|
Reg: $295.00
SUMMER MADNESS PRICE: $238.00
|
|
|
6.5hp GX200 Clone Powersport Engine fits our kits and can be used as a replacement engine for most Gokarts and Minibikes. Overhead Valves, Recoil Start, Throttle Cable Hookup. Performance parts available to boost horsepower up to 26hp
|
|
|
|
|
|
Reg: $429.00
SUMMER MADNESS PRICE: $349.00
|
|
|
This engine fits all of the minibike and gokarts kits we sell. Can also be used as a replacement engine for most Gokarts and Minibikes. 6hp Overhead Valves, Powersport Throttle Return, 3 year warranty
|
|
|
|
|
|
Reg: $26.95
SUMMER MADNESS PRICE: $23.95
|
|
|
The stock gas cap on the Robin Engines may be a little too tall to fit on some minibikes. This low profile gas cap provides a little more clearance and can help make the cap easier to take off
|
|
|
|
|
|
Reg: $49.00
SUMMER MADNESS PRICE: $43.00
|
|
|
External Minibike Gas Tank. Some of the newer engines, including our Titan engines, are a little taller and it can be difficult to remove the gas cap. This tank solves the problem. Easy installation on our minibike kits. Small Plastic Tank
|
|
|
|
|
|
Reg: $59.00
SUMMER MADNESS PRICE: $48.50
|
|
|
5436C Honda / Clone Exhaust Curved Header exhaust pipe will wake up your Honda GX160 / GX200 or clone engine. Get on the throttle with this bolted on your motor and prepare for instant RPMs and acceleration. works great on our Titan engines
|
|
|
|
|
|
Reg: $29.95
SUMMER MADNESS PRICE: $19.00
|
|
|
Air Intake kit includes optional Billet Aluminum Carb Intake Adapter, Angled Air Filter and mounting Clamp for your Honda GX160 / GX200 or clone engine. works great on our Titan engines
|
|
|
|
|
|
Reg: $47.00
SUMMER MADNESS PRICE: $37.00
|
|
|
UNI Air Intake kit includes Billet Aluminum Carb Adapter, UNI Air Filter and mounting Clamp for your Honda GX160 / GX200 or clone engine. works great on our Titan engines
|
|
|
|
|
|
Reg: $190.00
SUMMER MADNESS PRICE: $160.00
|
|
|
This is the ultimate lightweight 1.8lb performance billet flywheel to wake up your Honda GX160 / GX200 or clone engine. Get on the throttle with this bolted on your motor and prepare for instant RPMs and acceleration. works great on our Titan engines
|
|
|
Product Reviews
|
 Don't miss our Taco Minibikes - click here!
Honda GX160/200
KARTING HISTORY
|
|