Tire Inner Tubes

Find your tire Inner Tube in the Chart below, then click on Innertube above and select the appropriate part number. The corresponding prices will appear. (Note: the tire charts contain specific inner tube recommendations)

TUBE SIZE PART NO.

     280/250 x 4 7129

     300 x 4 7128

     410/350 x 4 7130

     340/300 x 5 7131

     410/350 x 5 7132

     11-400 x 5 7135

     11-600 x 5 7116

     410/350 x 6 7133

     12-600 x 6 7127

     13-500 x 6 7136

     13-650 x 6 7141

     530/450 x 6 7134

     15-600 x 6 7125

     145-70 x 6 7140

     16-800 x 7 7119

     800 x 6 7138

     325/350 x 8 7123

     480/400 x 8 7121

     16-650/750 x 8 7118

     18-850/950 x 8 7120

     250 x 10 7126

     325/350 x 10 7137

Tire Mounting Precautions

NOTE: FOLLOW INFLATION LIMIT BELOW EVEN IF MARKING ON TIRE IS GREATER.

1. ALWAYS CLEAN THE WHEEL RIM AND LUBRICATE THE TIRE BEADS AND WHEEL RIM WITH A SOAP SOLUTION OR OTHER APPROVED TIRE LUBRICANT.
2. USE AN EXTENSION HOSE AND IN-LINE GAUGE WITH REGULATED AIR PRESSURE.
3. DO NOT STAND OVER TIRE WHILE INFLATING. USE SAFETY GLASSES AND SAFETY CAGE OR OTHER APPROVED INJURY-PREVENTION DEVICE DURING THE INFLATION PROCESS.
4. NEVER PRY AGAINST WHEEL RIM TO SEAT A TIRE.
5. DO NOT EXCEED 25 PSI TO SEAT THE TIRE ON TWO-PIECE WHEELS. IF BEADS ARE NOT PROPERLY SEATED, AIR PRESSURE OVER 25 PSI CAN CAUSE THE ASSEMBLY TO EXPLODE WITH FORCE SUFFICIENT TO CAUSE SERIOUS OR FATAL INJURIES. IF STILL NOT SEATED AT THAT PRESSURE, DEFLATE COMPLETELY, DISASSEMBLE AND RE-LUBRICATE AS DISCUSSED ABOVE.
6. FOLLOW TIRE MANUFACTURER'S INFLATION RECOMMENDATIONS ONLY AFTER YOU ARE CERTAIN TIRE BEADS ARE FULLY SEATED.