3542 Mini Bike Kit, 8 inch Wheels
 3542 Mini Bike Kit, 8 inch Wheels 3542 Mini Bike Kit, 8 inch Wheels |
shown for reference only: $659.00
*** THIS PAGE HAS BEEN UPDATED ***
click here to Shop Now
*oops! you have landed on an archived page, shown for reference only
Product Options
* denotes required field
Chain Guard*
Clutch Options*
Kickstand*
Fenders*
MINIBIKE KIT
MADE-IN-USA
8" Wheels
The minibike fork on this kit is bent forward at a 30 degree angle for more leg room and improved steering radius and handling for both kids and adults
EVERYTHING YOU NEED IS INCLUDED EXCEPT ENGINE AND CLUTCH.
8" Wheels, Remember the Old School Minibikes of the 60s? Like Taco? Rupp? This is the original MADE-IN-USA mini bike. Drum Brakes and Padded Seat. Painting & Assembly required
This is on of the original Mini Bikes made since 1960
Remember the Old School Minibikes of the 60s? Like Taco and Rupp?
Those of you who grew up in the 60’s
Remember Minibikes as a wonderful part of childhood.
Boy's who were fortunate enough to own one couldn’t wait to get out of school and go down to the local field to ride
Painting and Assembly Required
One of the only Old School Mini Bikes still manufactured today!
|
COMPONENTS INCLUDED IN THIS KIT:
The minibike kit includes all of the components shown above. Add a Clutch and Engine to complete the Mini Bike
|
|
SPECS:
- Will accept a 2 to 6hp Engine
- 4 1/2" Internal Expanding Brake
- 8" Wheels
- Front Tire: Knobby
- Rear Tire: Knobby
- #35 chain with master link
- Low cost, High Quality, MADE-IN-USA
- Rugged Construction
- Ready to paint and assemble with basic hand tools
|
|
|
|
CLUTCH
You will need to select a Clutch for your Mini Bike in Product Options above. The 12 tooth clutch will give you a faster take off and lower gearing for climbing hills. The 13 tooth clutch will give you more top end speed
|
|
ENGINE
The Mini Bike Kit does not include an Engine unless you add one. After adding this Mini Bike Kit to your cart, you must scroll down to add an engine. (engine sold separately)
All of the engines shown below fit this frame and have a throttle cable adapter setup for minibikes. Not just any engine will work on a Mini Bike
|
|
CHAIN GUARD
Add a Chain Guard, Strongly Advised, in Product Options above
|
|
KICKSTAND
Add a Kickstand with weldable Mounting Bracket in Product Options above
|
|
FENDERS
Add Fenders in Product Options above. Select Chrome or Paint Ready finish. installation requires drilling of the fenders. mounting screws not included
GAS TANK: Most of the newer engines now have a larger gas tank and a much taller gas cap due to EPA requirements. On a Minibike, this can make it difficult or impossible to remove the gas cap. If you are ordering one of our minibike kits (Road Rocket, 3540, 3541 or 3544) we recommend installing the external Minibike Gas Tank shown below when using our Titan Engines. When using our Robin Engines, we recommend ordering the Low Profile Gas Cap. This is not an issue on a Gokart
|
|
See Mini Bikes in Action
|
|
FUN TO BUILD
Has everything you need. Easy-to-follow Instructions included.
No Welding, just basic tools. it's Fun!
This is an excellent project for you or your family. Not only does it help teach mechanical basics, but you can also have the fun of riding it after you have said
"I built it myself!"
The kit includes everything you need except an engine and clutch. Add a Clutch and other add-ons in Product Options above. Then scroll down to add an engine if you need one.
No welding is required! Everything simply bolts together. The Frame & Forks come completely welded and are not painted, are made from thick-wall mild steel tubing.
The engines shown below fit this frame and have throttle cable adapter setup for minibikes.
|
ENGINE INFO: Not just any engine can be used on a Go Kart or Minibike. The engines shown below are factory designed to be used on Go Karts or Minibikes
|
|
Lawn Mower and Utility Engines from other suppliers may cause you to have unwanted problems such as these:
|
-
They may not have the proper spring-loaded throttle return for the throttle cable
-
The crankshaft may be the wrong length and a standard clutch will not fit
-
The side cover may not have a standard bolt pattern for adding chain guards, Torq-a-Verter kits, etc.
-
It may also be completely under-powered because of the RPM range of the engine
|
*minibike parts are sold as a novelty items, not for use on public roadways
WARNING: INJURY OR DEATH MAY OCCUR
THESE ARE PARTS ONLY. No representation is made regarding use of these parts for a specific purpose. Customer Assumes All Risk associated from using these parts or operating any device using these parts. Customer is responsible for any and all final design of application and use of these parts. Only persons with proper mechanical training should use these parts
|
IMPORTANT
READ THIS BEFORE ANY ASSEMBLY
Mini-bikes must be operated in accordance with all applicable laws and regulations and riders must comply with all requirements regarding head, eye and body protection. Please check with appropriate government agencies before operating your mini-bike. Prior to any operation, all riders must be properly trained in, and fully knowledgeable of all mini-bike functions and safe operation and procedure. Full compliance with this with all information set forth in these guidelines is mandatory.FAILURE TO FULLY COMPLY IS UNSAFE AND COULD POSSIBLY RESULT IN SERIOUS INJURY OR DEATH.
CHAIN GUARD
WARNING: This kit does NOT contain a Chain Guard. IT IS UNSAFE TO OPERATE A MINI-BIKE WITHOUT A CHAIN GUARD. DO NOT OPERATE WITHOUT A CHAIN GUARD COVERING BOTH SPROCKETS AND THE CHAIN.
ASSEMBLY SAFETY
Assembly should be performed by knowledgeable individuals using appropriate tools. Please consult with your retailer or a Kart or Mini-Bike shop or your local, knowledgeable mechanic if you experience problems with, or have questions about any portion of the assembly process, individual or overall function or operation whatsoever.
CAUTION! COMPRESSED AIR CAN BE DANGEROUS! Containment guards and eye protection should be used when inflating tires. Assemble tires and wheels with care. Never force a tire onto a wheel by prying against the wheel rim. A properly assembled tire will seat itself onto the wheel rim with less than 15 pounds per square inch (psi) of air pressure.
|
|
|
EVERYTHING INCLUDED: 8 in. Aluminum Wheels, Tires, Innertubes, Drum Brake , Brake Lever, Brake Cable, 72T Sprocket, #35 Chain, Throttle Controls, Padded Seat and all Hardware. Add Engine and Clutch to complete kit.
PARTS INFORMATION
over 21,000 parts
- IDENTIFY YOUR MODEL
This can be one of the biggest challenges in ordering correct parts. If you ordered
your Vehicle from us, we can look-up your records.
- FACTORY PARTS
150/300 TrailMaster, Kandi,
IceBear, Kinroad, Hammerhead,
Roketa
- MINIBIKE PARTS
Manco, Kenbar, Yerf-Dog, Kartco, Carter, Azusa, Taco, Bonanza, Little BadAss, American Racer
- DIRT BIKE PARTS
70, 110, 125, 150, 250cc SSR, Apollo, PitsterPro, Thumpstar, Roketa
- GOKART PARTS
Manco, Kenbar, Kartco, Yerf-Dog, Carter, Azusa, TopKart
- ATV PARTS
110, 125, 150cc, Coolster, Icebear, Trailmaster, Kandi, Kayo
- SCOOTER PARTS
50, 150cc Icebear, BMS, SSR, Znen, Trailmaster
- PERFORMANCE PARTS
150/250/300cc TrailMaster, Kandi, Icebear,
Kinroad, BMS, Roketa, SunL, American Sportworks,
Carter, Dazon
ALL PARTS
see all categories
choose Free Helmet 
Product Reviews
| (1 Rating, 0 Reviews) |
Average Rating:
|
GO KART & MINI BIKE PARTS
EVERYTHING INCLUDED: 8 in. Aluminum Wheels, Tires, Innertubes, Drum Brake , Brake Lever, Brake Cable, 72T Sprocket, #35 Chain, Throttle Controls, Padded Seat and all Hardware. Add Engine and Clutch to complete kit.
new
90-lbs
//gokartsusa.com/images/products/detail/Mini_Bike_Kit_8_inch_wheels_22.1.jpg
Red/Black/Blue
A3542
Kits
|
|