American Racer 215 Mini Bike (Special Order)
AMERICAN RACER
215
FULLY ASSEMBLED | 11.5hp Stage 1 Motor |
GTC Torque Converter | or Straight Clutch | Aluminum Open Primary Cover |
Mikuni Carb | Stinger Exhaust | Cylindrical Gas Tank | Fuel Pump | Powdercoat
Finish | 8" Wheels | Large Foot Pegs | 5 Degree Engine Mount | High Quality |
All Parts Available | Made-in-USA
American Racer Mini Bikes are designed
after the old Bonanza Mini Bikes Built by Jack Costella back in the 60s. We
have painstakingly re-created these bikes.
Equipped with Torque Converter, this bike will pull an adult up a hill.
It rides well, is made well and looks great, with tons of performance parts
available. *CARB Approved for
CALIFORNIA
This is the KIT version, ASSEMBLY
REQUIRED. the 215 is also available Fully Assembled below
Download the
OWNERS GUIDE
STOCK SPECIFICATIONS:
-
6.5hp Engine, 196cc,
4-Stroke, Single Cylinder, Air-Cooled, Pull Start
-
GTC Billet Aluminum
TC2 Torque Converter
-
5 degree Engine
Mount with Cut-away for Torque Converter
- 8" Wheels, Polished Aluminum
- 1" Heavy Duty
Frame with Chain Adjust Rear Axle
-
40/41 Heavy Duty
Chain with 54T Sprocket
-
5" Heavy Duty
Drum Brake
-
Tires: F/R:
480/400-8 Knobby
-
Aluminum Kickstand
-
Fuel capacity: 1 gal
-
Bike Weight: 82 lbs
-
Max Speed: 37mph
(stock)
)
-
Max load: 290 lbs
-
Wheelbase: 39
-
Dimensions (LWH): 54x26x49
-
Engine Oil: 10W30
-
Seat Height: 27"
-
Ground Clearance: 6"
-
Speed Governor
-
Low Oil Sensor
FULLY ASSEMBLED 11.5hp Titan TX200 or Honda Engine, Powder Coat Package: Frame, Tank, Primary Cover. Choose Clutch or GTC TC2 Torque Converter with a Billet Aluminum Engine Mount, Mikuni Carb, Stinger Exhaust, 8" Wheels, Heavy Duty Brake. MADE IN USA
VEHICLE ASSEMBLY
Since you are skipping the Dealer and saving over half the retail
cost, you will have some assembly to do.
Vehicles are shipped warehouse direct, in a crate, 95% assembled.
Customer must:
- un-crate
- perform initial vehicle setup
- perform engine oil service
- check and adjust all systems, throttle, brakes
- check and tighten all nuts and bolts
- perform break-in service after 1 hour of operation
- by customer's mechanic at customer's expense
EVEN ON ASSEMBLED UNITS: Initial Vehicle Setup and maintenance must be performed by a qualified mechanic.
Initial Setup can include installing: wheels, seats, roll cage, lights, battery. Break-in Service must be performed after 1 hour of operation and can include: engine oil service, check and tighten all nuts and bolts, check and adjust cables, throttle, brakes, chain and all other systems.
Who can work on my Vehicle?
There
may not be many Go Kart or Scooter shops in your area.
- Small Engine Repair Shops
- Garden Equipment Shops
These shops can help with Assembly, Repair or Maintenance. Often times, they
can come to your house.
All Parts are available for online ordering.
All Manuals can be downloaded.
WARRANTY
The Manufacturer Warranty DOES NOT COVER REPAIRS. The
Manufacturer covers parts only and labor is not covered
under any circumstances. Any damaged or missing delivery items will be replaced. The
warranty covers defects in material and workmanship and DOES NOT COVER repairs
or damage
due to operation.
SUPPORTTo request support or initiate a Warranty Claim, please complete a
Help Request
. Parts can be purchased at any time on our website.
Resources
choose a Free Gift or get an Extra Discount 
Product Reviews
MINI BIKE
FULLY ASSEMBLED 11.5hp Titan TX200 or Honda Engine, Powder Coat Package: Frame, Tank, Primary Cover. Choose Clutch or GTC TC2 Torque Converter with a Billet Aluminum Engine Mount, Mikuni Carb, Stinger Exhaust, 8" Wheels, Heavy Duty Brake. MADE IN USA
new
140-lbs
//gokartsusa.com/images/products/detail/American_Racer_215_Mini_Bike_d004L2.1.jpg
Red/Black/Blue
AMF215
American Racer
|
|