Home > STREET > Silver Slant 80 Bicycle Engine Kit
Silver Slant 80 Bicycle Engine Kit

 Bicycle Gas Engine Kit, BICYCLE NOT INCLUDED      |
Item No: 33493
Brand: KMB
IN-STOCK
Product Options
* denotes required field
Engine Assembly*
Silver Slant 80 Bicycle Engine Kit
Convert your bicycle to a motorized bicycle by adding a 2 stroke engine kit to it. The kit fits best on bikes with 25 to 30mm diameter front down tube and 70 degree Vee type frame like a mountain bike but can be installed on larger diameter tube frames with modifications. “Looks Cool” on the older beach cruiser type coaster brake bikes. The motor bolts to the bicycle frame in the center of the frame (additional mounting options available). A second Heavy Duty chain is attached from the motor to the rear wheel via a second sprocket attached to the rear wheel.
Gas Mixture
This bike motor kit comes with everything that you'll need except gas and oil, since this is a 2 stroke, 2 stroke oil needs to be added to the fuel. Always mix gas in a gas can, not the gas tank. When the engine is new, it would need to be broken in with a richer mixture, after at least 1 tank of gas, then the mix can be “leaned out” (less oil). Never go less than 32:1 ratio (4oz of oil per Gallon).
New Motor - 16:1 (8 oz of oil per gallon)
After Broken in - 32:1 (4 oz of oil per gallon)
The motor will require some assembly, the top end of the motor must be installed.
This bike motor kit includes:
Silver Slant 66cc/80cc Angle Fire Slant Head Engine 2.75 HP
Friction Clutch; Pedal Start
Magneto With Solid State CDI Ignition
44 Tooth, 9 Hole Chrome Sprocket
3 Plate Sprocket Kit
2.0 Liter Fuel Tank, Tear Drop Shape (Black Color)
Chrome Muffler
NT Carburetor
Push Button Clutch Lever And Cable
Twist Throttle With Engine Kill Switch
Improved Gas Valve
Fuel Line #2
Idler Pulley Chain Tensioner with Bearings
Improved NT Carburetor
Chrome Lined Cylinder Wall
Head With Center Fire Spark Plug
202 Crankcase Bearings
Needle Bearings On Piston Wrist Pin
Improved 415 Chain
Chain Guard
Tool Kit
All The Mounting Brackets, Gaskets, And Hardware Including Nylon Locking Nuts
Universal Motor Mount
Complete User Manual
6-Month Limited Warranty Included - FREE
Bicycle Requirements:
This bicycle motor engine kit fits most Mens 24" and larger bicycles which includes mountain, cruiser, chopper and road bikes with a V-frame with at least a 8.5" height clearance for the engine. Larger frame size requires drilling into bike frame and use of the universal face plate.
Dimensions:
This 80cc bicycle motor engine kit is about 8.5" height 7" length 5" width and fits on most standard 24” – 26” or 25mm 29mm frame bicycle frame tubes. Larger frame size requires drilling into bike frame and use the universal face plate. This engine kit only adds about 20 lbs to your bike.
Our gasoline operated products are NOT compliant with Environmental Protection Agency ( E.P.A. ) or California Air Resources Board (C.A.R.B) for the use on/off Public roads. Upon purchase, the buyer agrees to use products for racing (closed-course competition) only and NOT for on/off public roads.
Convert your bicycle to a motorized bicycle by adding a 2 stroke engine kit to it. The kit fits best on bikes with 25 to 30mm diameter front down tube and 70 degree Vee type frame like a mountain bike but can be installed on larger diameter tube frames.
VEHICLE ASSEMBLY Since you are skipping the Dealer and saving over half the retail
cost, you will have some assembly to do.
Vehicles are shipped warehouse direct, in a crate, 95% assembled.
Customer must:
- un-crate
- perform initial vehicle setup
- perform engine oil service
- check and adjust all systems, throttle, brakes
- check and tighten all nuts and bolts
- perform break-in service after 1 hour of operation
- by customer's mechanic at customer's expense
EVEN ON ASSEMBLED UNITS: Initial Vehicle Setup and maintenance must be performed by a qualified mechanic.
Initial Setup can include installing: wheels, seats, roll cage, lights, battery. Break-in Service must be performed after 1 hour of operation and can include: engine oil service, check and tighten all nuts and bolts, check and adjust cables, throttle, brakes, chain and all other systems.
Who can work on my Vehicle? There
may not be many Go Kart or Scooter shops in your area.
- Small Engine Repair Shops
- Garden Equipment Shops
These shops can help with Assembly, Repair or Maintenance. Often times, they
can come to your house.
All Parts are available for online ordering.
All Manuals can be downloaded.
WARRANTY
The Manufacturer Warranty DOES NOT COVER REPAIRS. The
Manufacturer covers parts only and labor is not covered
under any circumstances. Any damaged or missing delivery items will be replaced. The
warranty covers defects in material and workmanship and DOES NOT COVER repairs
or damage
due to operation.
SUPPORTTo request support or initiate a Warranty Claim, please complete a
Help Request
. Parts can be purchased at any time on our website.
Resources
choose a Free Gift or get an Extra Discount
Product Reviews
STREET
Convert your bicycle to a motorized bicycle by adding a 2 stroke engine kit to it. The kit fits best on bikes with 25 to 30mm diameter front down tube and 70 degree Vee type frame like a mountain bike but can be installed on larger diameter tube frames.
new
20-lbs
//gokartsusa.com/images/products/detail/silver-slant-66cc-80cc_1024x1024.jpg
Red/Black/Blue
KMB-SS66-80
KMB
|
|