Home > STREET > Bicycle Gas Engine Conversion Kit, (Bicycle Not Included)
Bicycle Gas Engine Conversion Kit, (Bicycle Not Included)
BICYCLE ENGINE KIT
Bicycle Engine conversion kit for 26-29" wheel
(Bicycle NOT Included) Choose your engine finish above
INCLUDED:
- 44 tooth flat sprocket with mounting hardware
- 80cc 2-stroke engine kit (assembly required)
- petcock
- push button lock alloy clutch lever
- heavy duty chain (#415/#50)
- adjuster short bearing chain idler
- kill switch ( on handlebar)
- chain guard
- exhaust header and muffler
- carburetor
- cdi ignition
- throttle control, cable and dummy grip
- black gas tank with mounting brackets, 2L
- other needed mounting and hardware
- Bigger frame adapter ( U clamp for extra big frame, no need drill the hole)
engine assembly required. comes with crankcase assembly, cylinder and head assembly
This kit comes with everything that you'll need to convert your bicycle into a motorized bike.
NO need to buy anything else.
You'll still be able to pedal the bike and ride like normal or start the engine by releasing the clutch lever. There's no rope pulling needed. You can stop or start the engine as you ride.
Grip hand throttle controls speeds from 25 to 30/mph depending on the gear ratio. (MPG 100-150)
installation kit comes with a 44 tooth 9 hole chrome racing sprocket with easy to install 9 bolt universal mounting hardware that clamps over the rear wheel hub and spokes. This creates a totally independent drive sprocket and chain that does not interfere with your current drive chain or peddling. With the built in clutch you maintain full function of the original bike. Pedal, shift, and ride your bike like normal. The engine kit only adds about 19lbs to your bike. When you want to engage the engine simply release the clutch hand lever and the engine springs to life.
To power off simply press the included kill switch
-
25 to 40 mph depending on the gear ratio and weight.
-
MPG 100-150 miles per gallon
-
Independent drive sprocket and chain does not interfere with your current drive chain and peddling
It only takes an afternoon to turn your ordinary bicycle into a motorized gas scooter using our complete ready to install bicycle engine kits.
Amazing 150 miles per gallon during this tough economy.
You'll still be able to pedal the bike and ride like normal or start the engine by releasing the clutch lever
Product Dimensions
Kit fits on standard 25mm to 29mm frame tube. Larger frame size requires drilling into bike frame and use the universal face plate. Ensure proper fit by reviewing the minimum dimension.
Product Requirements
For installing this kit, the buyer will need some basic mechanical skills, tools. It takes around 3 - 5 hours to install and do some adjustments. There is no warranty offered on this kit and the kit is not returnable for any reason.
Convert Your Bicycle to 80cc 2-Stroke GAS ENGINE with this Bicycle Engine conversion kit for 26-29" wheel. Install this kit on your bicycle. This kit has Everything you'll need (Bicycle not included)
VEHICLE ASSEMBLY
Since you are skipping the Dealer and saving over half the retail
cost, you will have some assembly to do.
Vehicles are shipped warehouse direct, in a crate, 95% assembled.
Customer must:
- un-crate
- perform initial vehicle setup
- perform engine oil service
- check and adjust all systems, throttle, brakes
- check and tighten all nuts and bolts
- perform break-in service after 1 hour of operation
- by customer's mechanic at customer's expense
EVEN ON ASSEMBLED UNITS: Initial Vehicle Setup and maintenance must be performed by a qualified mechanic.
Initial Setup can include installing: wheels, seats, roll cage, lights, battery. Break-in Service must be performed after 1 hour of operation and can include: engine oil service, check and tighten all nuts and bolts, check and adjust cables, throttle, brakes, chain and all other systems.
Who can work on my Vehicle?
There
may not be many Go Kart or Scooter shops in your area.
- Small Engine Repair Shops
- Garden Equipment Shops
These shops can help with Assembly, Repair or Maintenance. Often times, they
can come to your house.
All Parts are available for online ordering.
All Manuals can be downloaded.
WARRANTY
The Manufacturer Warranty DOES NOT COVER REPAIRS. The
Manufacturer covers parts only and labor is not covered
under any circumstances. Any damaged or missing delivery items will be replaced. The
warranty covers defects in material and workmanship and DOES NOT COVER repairs
or damage
due to operation.
SUPPORTTo request support or initiate a Warranty Claim, please complete a
Help Request
. Parts can be purchased at any time on our website.
Resources
choose a Free Gift or get an Extra Discount 
Product Reviews
STREET
Convert Your Bicycle to 80cc 2-Stroke GAS ENGINE with this Bicycle Engine conversion kit for 26-29" wheel. Install this kit on your bicycle. This kit has Everything you'll need (Bicycle not included)
new
24-lbs
//gokartsusa.com/images/products/detail/Bike_Engine_Kit_22.jpg
Red/Black/Blue
G-UED-80
United
|
|