Item No: W609-0123
It is more affordable to replace the original carb than clean it. Many original carburetors are of lower quality and should be replaced with these quality carbs to ensure reliable performance.
|
Item No: G12-1866
List Price: $29.99
TAX RETURN SALE: $24.95
You Save: $5.04 (17 %)
Handy kit includes all tools necessary to completely disassemble carb, change jets, etc.
|
Item No:
List Price: $7.75
TAX RETURN SALE: $6.95
You Save: $0.80 (10 %)
HEX Main Jets, for Mikuni Carburetors 22mm, 24mm 26mm, 28mm. Jet sizes 85mm to 190mm
|
Item No: W609-2012
GY6 Electric Choke 250cc 2-Wire Plug/1 Loose Wire
|
Item No: W609-0100
Compatible with: 2-stroke models, 47/49mmcc: Type MTA1. Most commonly used 2-stroke carburetor. Fits pocket bikes, dirtbikes and ATVs. OEM stock replacement part. 13mm diameter opening on engine/intake side. Includes gasket
|
Item No: W609-0106
Compatible with: 2-stroke models 33/36cc.10mm diameter intake opening on engine side. 31mm bolt hole spacing. Fuel pump for quick start. Mounting bolts not included.
|
Item No: W609-0108
Compatible with: 2-stroke 43 and 49cc models. Type X1/ X2/X6/X7.2-stroke X7 style carburetor with single prime bulb. 2.75” height (excluding primer bulb). Sold with gasket. 15mm
|
Item No: W609-0142
5.5-6.5hp General purpose 4-stroke models with built in fuel filter. Fits Honda GX160 motors and many other 5.5-6.5hp general purpose 4-stroke engines used on lawn mowers, power generators, go-karts and select dirtbikes/motorcycles. 19mm diameter intake.
|
Item No: W609-0120
Compatible with: Horizontal 4-stroke models 50-125cc. Replacement stock/OEM carburetor. Fits most 4-stroke engines that require 16mm opening. Air filter intake: 35mm. Bolt hole spacing: 48mm.
|
Item No: W609-0122
Compatible with: Horizontal 4-stroke 50-125cc models. 19mm carburetor with hand choke. Fits most 4-stroke horizontal style engines that require 19mm opening. Used on ATVs, dirt bikes and mid-sized pocket bikes. BHS 48mm, air filter opening: 35mm.
|
Item No: W609-0101
Compatible with: 2-stroke models, 47/49mmcc: Type MT-A1 Same application as above, but if you are tired of constantly adjusting your original stock carburetor or having fuel issues this carburetor is your solution. Sold with carb., air filter, intake
|
Item No: W609-0127
Compatible with: Horizontal 4-stroke 125-150cc models, and vertical style engines. Replacement stock/OEM carburetor. Fits most 4-stroke engines that require 26mm opening. Air filter size 38mm. Bolt hole spacing: 48mm. Commonly used on 125cc Pit bikes.
|
Item No: W609-0126
Compatible with: Vertical style 4-stroke models. Replacement stock/OEM carburetor. Fits most 4-stroke engines that require 30mm opening. Air filter mount: 42mm. Bolt hole spacing engine side: 48mm. Set up for cable and hand choke.
|
Item No: W609-0420
Fuel Filter 1/4 inch Straight
|
Item No: W609-0421
Fuel Filter 3/16 inch Straight
|
Item No: W609-0422
Fuel Filter 5/16 inch Straight
|
|
|