Flywheel, Billet Honda GX200, Clone & Titan Engines
shown for reference only: $122.35
*** THIS PAGE HAS BEEN UPDATED ***
click here to Shop Now
*oops! you have landed on an archived page, shown for reference only
FLYWHEEL
Billet Honda GX160/200 MADE-IN-USA
fits the 5.5 and 6.5hp engines Honda and Titan. Works great on our Titan Engines
|
The new 6689 billet flywheel from ARC Racing has an ultra low drag fin design that will greatly reduce air drag on your AKRA racing engine, while still moving enough air for cooling.
Less air drag on the flywheel means more power freed up throughout the power curve, especially on the top end.
This flywheel will have the same basic set up as the 6619. Recommended timing for AKRA unrestricted engines is still 34-36 degrees.
Recommended timing for plate engines is 36-38 degrees. This flywheel also has a minimum coil gap of .030 as all our other flywheels do, meaning DO NOT set the gap closer than .030. However we use much more gap than that. Our testing shows on most unrestricted and plate engines that a coil gap of .065-.075 worked the best.
The magnets in this flywheel are very strong and opening up the coil gap will help reduce magnet drag as the magnet moves underneath the coil. This is yet another advantage that will help free up more power in these AKRA engines.
This new 6689 flywheel has more power making potential than any other approved flywheel on the market. Our test as well as testing from other reputable companies shows it will make around the same power with zero tape on the blower housing as the 6619 does with the blower housing fully taped up.
Flywheel weight 3.4lbs AKRA legal Box Stock Class.
SFI certified billet aluminum flywheel for Honda GX160, GX200, Titan TX200. The keyway is fixed in. the stock position and the stock pull starter can be used. Weighs 3.5lbs and incorporates a special low drag fan design. MADE-IN-USA
PARTS INFORMATION over 21,000 parts
- IDENTIFY YOUR MODEL
This can be one of the biggest challenges in ordering correct parts. If you ordered
your Vehicle from us, we can look-up your records.
- FACTORY PARTS
150/300 TrailMaster, Kandi,
IceBear, Kinroad, Hammerhead,
Roketa
- MINIBIKE PARTS
Manco, Kenbar, Yerf-Dog, Kartco, Carter, Azusa, Taco, Bonanza, Little BadAss, American Racer
- DIRT BIKE PARTS
70, 110, 125, 150, 250cc SSR, Apollo, PitsterPro, Thumpstar, Roketa
- GOKART PARTS
Manco, Kenbar, Kartco, Yerf-Dog, Carter, Azusa, TopKart
- ATV PARTS
110, 125, 150cc, Coolster, Icebear, Trailmaster, Kandi, Kayo
- SCOOTER PARTS
50, 150cc Icebear, BMS, SSR, Znen, Trailmaster
- PERFORMANCE PARTS
150/250/300cc TrailMaster, Kandi, Icebear,
Kinroad, BMS, Roketa, SunL, American Sportworks,
Carter, Dazon
ALL PARTS
see all categories
choose Free Helmet
Product Reviews
Engines
SFI certified billet aluminum flywheel for Honda GX160, GX200, Titan TX200. The keyway is fixed in. the stock position and the stock pull starter can be used. Weighs 3.5lbs and incorporates a special low drag fan design. MADE-IN-USA
new
6-lbs
//gokartsusa.com/images/products/detail/HondaGX200Flywheel6619.jpg
Red/Black/Blue
G-6689
ARC
|
|