Wakeboard Win. Torque Converter

Wakeboard Win. Torque Converter, GTC a better built machine
Wakeboard Win. Torque Converter, GTC a better built machineTC2 Torque Converter for 1 Inch crankshaft engines
Item No: 1729
Brand: GTC Industries
List Price: $199.00
ORDER NOW: $189.00
You Save: $10.00 (5 %)
IN-STOCK

Use Code MEGA

Product Options

* denotes required field

Cover*
Belt Guard*
Extra Belt*
MODEL*

 

Get a Free Gift or Extra Discount
WAKEBOARD WINCH 
   TORQUE CONVERTER    (winch not included)
GUARANTEED IN STOCK
Wakeboard Winch Torque Converter.  Select a 3/4 or 1 Inch Bore Model
 compatible with Comet* TAV2* 30 Torq-A-Verter for Tecumseh, Briggs, Subaru  and most 5-7hp Engines. IN STOCK READY TO SHIP
 
The TC2 fits the popular Grinch Winch by Distortion Boarding. The 7hp Subaru Robin has a 3/4" crankshaft. Select your TC2 in Product Options above
 
Torque Converters dramatically improve Power and Acceleration on your winch

DOCUMENTATION:
 
*Note: COMET and TAV2 are trademarks of Certified Parts Corporation. GTC Industries is not affiliated or associated with Certified Parts or its products in any way
  
Bench Test Video
 
QUALITY ASSURANCE TESTING:
GokartsUSA's initial testing of the GTC Torque Converter proved highly successful. The TC2 was road tested on a Little Bad Ass Minichopper with a 5hp Tecumseh Engine. The TC2 model 1002 was used which has a 3/4" Bore and #40/41P Chain. The performance impressed our technicians. The low end power and torque was strong enough to raise the front wheel with just barely applying the throttle. Take off and acceleration was also remarkably impressive. Taking on a steep hill from a complete stop, the TC2 smoothly down shifted and pulled the 200 pound rider up the hill with ease. On level ground, at maximum throttle, the TC2 shifted into a very high overdrive ratio and gave us an impressive top speed of 52mph from this stock 5hp Tecumseh. All in all, the TC2 performed significantly better than the stock TAV2 the bike originally came with
   
INCLUDED:
The TC2 Torque Converter is a complete kit that includes both drive and driven clutches, belt, billet aluminum engine mounting plate with a built in jackshaft and sprocket, all hardware and installation instructions
  
MODELS:
Four TC2 Kit Models Available
  • 1001  3/4" Bore, #35 Chain
  • 1002  3/4" Bore, #40/41 Chain
  • 1003  1" Bore, #35 Chain
  • 1004  1" Bore, #40/41 Chain 
ENGINES:
TC2 Bolts onto most engines with a horizontal shaft including:
  • Briggs
  • Robin 
  • Tecumseh
  • Honda (and many clones) 
  • Kohler
  • Clinton
  • Lifan  
High Performance
The TC2 is a High Performance asymmetrical torque converter system in which the sheave faces have different angles. The system operates with the torque sensing cam in an outboard position allowing for in-line operation of the unit. The primary benefit of this design is that it allows proper alignment of the final drive chain to be on the same side of the vehicle as the torque converter. Moreover, the angle on the movable sheave being set at 18 degrees enables the unit to raise the belt to a larger pitch diameter with less travel of the sheave. This allows the unit to achieve higher overdrive ratios at maximum RPM

·         In-Line Operation

·         Powerful Low Ratio

·         Smooth Shifting on Load Demand

·         Infinite High  / Low Ratios

·         High Performance Overdrive

 OPERATION OF THE TC2

The TC2 provides Neutral engagement at Engine Idle. At 2200 RPM, the system engages for a Powerful Low Ratio for great takeoff speed. At Mid Range, the TC2 instantaneously shifts ratios based upon RPM and Load Requirements. Finally, the High Performance Overdrive engages for maximum speed

  
  

 TC2 Drive and Driven Units
TC2 Drive and Driven Units

 

Parts

PART#

DESCRIPTION

COMET#

1001

TC2 Torque Converter 3/4" Bore, #35P, 12T

218352A

1002

TC2 Torque Converter 3/4" Bore, #40/41P, 10T

218353A

1003

TC2 Torque Converter 1" Bore, #35P, 12T

218354A

1004

TC2 Torque Converter 1" Bore, #40/41P, 10T

218355A

1005

DRIVER UNIT 3/4"

203814A

1006

DRIVER UNIT 1"

203603A

1007

DRIVEN UNIT 5/8" BORE

217610A

1008

DRIVER MOUNTING BOLT 3/4" CRANKSHAFT

205384A

1009

DRIVER MOUNTING BOLT 1" CRANKSHAFT

215732A

1010

LOCK WASHER, 5/16

200701A

1011

PILOT WASHER 3/8

200840A

1012

PILOT WASHER 5/16

202429A

1013

DRUM DRIVER 3/4"

202090A

1014

DRUM DRIVER 1"

202427A

1015

HUB DRIVER 3/4" 4 SPLINED

203376A

1016

HUB DRIVER 1" 8 SPLINED

203641A

1017

DRIVER WEIGHT ASSY W/SPRINGS

200344A

1018

BLUE GARTER SPRING SET OF 2

011188A

1019

SHEAVE MOVABLE HALF W/HUB 3/4" BORE

200410A

1020

SHEAVE MOVABLE HALF W/HUB 1" BORE

203515A

1021

BUSHING BRONZE (NOT USED ON 1")

200349A

1023

BELT, ASYMMETRIC

203589A

1024

SHEAVE STATIONARY 3/4" BORE

202066A

1025

SHEAVE STATIONARY 1" BORE

206633A

1026

SPACER STEEL  3/4"

200389A

1027

SPACER STEEL  1"

202877A

1028

JAM NUT

203189A

1029

SNAP RING

204714A

1030

FIXED CAM

215650A

1031

SPRING GREEN

215699A

1032

FACE MOVEABLE WITH CAM

215647A

1033

BUTTON INSERT

204332A

1034

BUSHING

203942A

1035

FACE FIXED WITH POST 5/8" BORE

217612A

1036

KEY 3/16" SQ  x  2-1/4"

209831A

1037

KEY 3/16" SQ  x  9/16"

011059A

1038

JACKSHAFT, 5/8" DIAMETER

212225A

1039

WASHER 5/8"

200834A

1040

SPROCKET 12T 35P

200379A

1041

SPROCKET 10T 40/41P

102168A

1042

BALL BEARING SEALED 5/8"

215558A

1043

SPACER 5/8"

 

203187A

1044

SNAP RING FOR 5/8" SHAFT

212227A

1045

MOUNTING BRACKET W/BEARINGS AND SPACER

218525A

1046

ENGINE MOUNTING BOLT

217867A

1047

LOCK WASHER 5/16"

200701A

1048

SHROUD PLASTIC W/DECALS

218351A

1049

SCREW, SHROUND MOUNTING

214146A

1050

ROUND DECAL

218513A

1051

LONG DECAL

218514A

WARNING: Serious injury or death can result from improper installation or operation of this product. Children under the age of 16 should not operate vehicles with this product installed. Do not operate the TC2 without a cover, chain and belt guard device designed specifically for your vehicle (not supplied). Long hair or loose clothing can become entangled with moving parts and cause serious injury or death. Engines and moving parts can become hot and cause burns. By ordering this product, the purchaser accepts all risks associated with installation and operation of this product
Wakeboard Win. Torque Converter. Select a 3/4 or 1 in. Bore Model. Fully Compatible with Comet* TAV2* 30 Torq-A-Verter for Tecumseh, Briggs or Subaru Engines. in. STOCK READY TO SHIP


VEHICLE ASSEMBLY
Since you are skipping the Dealer and saving over half the retail cost, you will have some assembly to do.

Vehicles are shipped warehouse direct, in a crate, 95% assembled.

Customer must:

  • un-crate
  • perform initial vehicle setup
  • perform engine oil service
  • check and adjust all systems, throttle, brakes
  • check and tighten all nuts and bolts
  • perform break-in service after 1 hour of operation
  • by customer's mechanic at customer's expense

EVEN ON ASSEMBLED UNITS: Initial Vehicle Setup and maintenance must be performed by a qualified mechanic.

Initial Setup can include installing: wheels, seats, roll cage, lights, battery. Break-in Service must be performed after 1 hour of operation and can include: engine oil service, check and tighten all nuts and bolts, check and adjust cables, throttle, brakes, chain and all other systems.

Who can work on my Vehicle?
There may not be many Go Kart or Scooter shops in your area.

  • Small Engine Repair Shops
  • Garden Equipment Shops

These shops can help with Assembly, Repair or Maintenance. Often times, they can come to your house.

All Parts are available for online ordering.

All Manuals can be downloaded.  

WARRANTY

The Manufacturer Warranty DOES NOT COVER REPAIRS. The Manufacturer covers parts only and labor is not covered under any circumstances. Any damaged or missing delivery items will be replaced. The warranty covers defects in material and workmanship and DOES NOT COVER repairs or damage due to operation.

SUPPORT

To request support or initiate a Warranty Claim, please complete a Help Request . Parts can be purchased at any time on our website.
 


Resources
  EXTENDED WARRANTY   HELP REQUEST   DOCUMENTATION
  GOKART & MINIBIKE PARTS   ALL PARTS   TRAILMASTER PARTS
choose a Free Gift or get an Extra DiscountSELECT A FREE GIFT

Quantity Discounts

QuantityAmount
2 to 3$186.00
4 to 6$184.00
7 to 9$182.00
10 to 9999$180.00
  FREE HELMET   FREE GOGGLES   FREE GLOVES

Product Reviews

(0 Ratings, 0 Reviews)


GTC Torque Converters Wakeboard Win. Torque Converter. Select a 3/4 or 1 in. Bore Model. Fully Compatible with Comet* TAV2* 30 Torq-A-Verter for Tecumseh, Briggs or Subaru Engines. in. STOCK READY TO SHIP new 16-lbs //gokartsusa.com/images/products/detail/wakeboardwinch01.jpg Red/Black/Blue TC2 GTC Industries

PRODUCT SCROLLER >>

  • 1001 GTC TC2 Torque Converter 3/4" #35 for Minibike or Gokart
    Item No:
    ratingratingratingratingrating
    List Price: $249.00
    ORDER NOW: $169.00
    You Save: $80.00 (32 %)
    1001 TC2. 3/4 in. Bore, 12 Teeth, #35 chain, 2-7 HP Engines. Fully Compatible with Comet* 218352A TAV2* 30 for Go Kart or Mini Bike. GUARANTEED in. STOCK
    View 1001 GTC TC2 Torque Converter 3/4" #35 for Minibike or Gokart
  • 1002 GTC TC2 Torque Converter, 3/4" 40/41/420 for Minibike or Gokart
    Item No:
    ratingratingratingratingrating
    List Price: $249.00
    ORDER NOW: $189.00
    You Save: $60.00 (24 %)
    1002 TC2. 3/4 in. Bore, 10 Teeth, #40/41 chain, Bolts onto 2-7 HP Engines. Fully Compatible with Comet* 218353A TAV2* 30 Torque Converter for Go Kart or Mini Bike GUARANTEED in. STOCK
    View 1002 GTC TC2  Torque Converter, 3/4" 40/41/420 for Minibike or Gokart
  • 1003 GTC TC2 Torque Converter, 1" #35 for Go Kart
    Item No:
    ratingratingratingratingrating
    List Price: $289.00
    ORDER NOW: $239.00
    You Save: $50.00 (17 %)
    1003 TC2. 1 in. Bore, 12 Teeth, #35 chain, Fully Compatible with Comet* 218354A TAV2* 30 Torque Converter for Go Kart or Mini Bike. GUARANTEED in. STOCK
    View 1003 GTC TC2 Torque Converter, 1" #35 for Go Kart
  • 1004 GTC TC2 Torque Converter, 1 inch 10T 40 41, Go Kart
    Item No:
    ratingratingratingratingrating
    List Price: $289.00
    ORDER NOW: $239.00
    You Save: $50.00 (17 %)
    1004 TC2. 1 in. Bore, 10 Teeth, #40/41 chain, Fully Compatible with Comet* 218355A TAV2* 30 Torque Converter for Go Kart or Mini Bike. GUARANTEED in. STOCK
    View 1004 GTC TC2 Torque Converter, 1 inch 10T 40 41, Go Kart
  • 1002P TC2 Torque Converter Kit, for Predator 212
    Item No:
    List Price: $199.00
    ORDER NOW: $189.00
    You Save: $10.00 (5 %)
    Install this TC2 1002P on a Predator 212. Predator has a shoulder at the crankshaft base that sits about 1/8 in. lower than a Honda or Clone engine. You will need Part#1057 Predator Crank Washer is included in. this kit. ENGINE NOT INCLUDED
    View 1002P TC2 Torque Converter Kit, for Predator 212
  • 1002B TC2 Torque Converter, for Baja/Coleman/Trailmaster Mini Bike
    Item No:
    ratingratingratingratingrating
    ORDER NOW: $204.12
    (Bike not included) Convert your Baja / Warrior / Coleman TrailMaster Mini Bike from a Jackshaft to a Torque Converter. The 1002 TC2 3/4 in. Bore, 10 Teeth, #40/41 chain, Easy to install, Bolts onto your 196cc Engine and gives you a big boost in power!
    View 1002B TC2 Torque Converter, for Baja/Coleman/Trailmaster Mini Bike