Home
Go Kart Rebuild Kit, 5 in. Aluminum Wheels, Less Frame
shown for reference only: $849.00
*** THIS PAGE HAS BEEN UPDATED ***
click here to Shop Now
*oops! you have landed on an archived page, shown for reference only
Product Options
* denotes required field
Chain Guard*
Clutch Options*
GOKART REBUILD KIT (less frame) MADE-IN-USA
Perfect for Building or Restoring a gokart, less frame
Complete, Easy-to-follow Instructions included
Assembly Instructions
Add a Clutch or Chain Guard in Product Options above
Then scroll down to add an engine if needed
Remember the Made-in_USA Old School Gokarts Like Kenbar, Kartco, Manco, Yerf-Dog, Carter and many others. These companies all went out of business in 2009.
This is the Rebuild kit for American Made Gokarts
These are the parts used by many USA Manufacturers for over 60 years. Just match-up your correct wheel diameter size, 5 or 6 inches and select your kit. Select a 12 tooth clutch for a faster take off. Select the 13 tooth clutch for top end speed. Add a Chain Guard, or a Clutch, if needed, in Product Options above
This kit comes with 5" Aluminum Wheels.
|
5" Wheels 3" wide mag style
|
|
4.10x3.50x5
outside diameter 11.6"
width 4.1"
Rear Knobby
|
4.10x3.50x5
outside diameter 11.6"
width 4.1"
Front Sawtooth
|
|
|
|
|
|
|
|
COMPONENTS INCLUDED IN THIS KIT:
| 1144
|
5" MAG WHEEL, 3" WIDE FOR 1-3/8" OD BALL BEARINGS WITH 5/8" ID PRECISION BALL BEARING
|
2
|
| 1147
|
5" MAG WHEEL, 3" WIDE FOR 1" LIVE AXLE WITH STEEL INSERT, 1" ID, 1/4" KEYWAY
|
2
|
| 1401-38
|
AXLE, 38" LENGTH 1"DIA, 2" STEPPED ENDS (1-3/8" THREAD LENGTH), 2 OFFSET 1/4" KEYWAYS
|
1
|
| 1409
|
AXLE GUARD, 1-1/4" SPLIT FLEXIBLE PLASTIC
|
2
|
| 1645
|
BUCKET SEAT COVER DELUXE
|
1
|
| 1721-B
|
KILL BUTTON SWITCH
|
1
|
| 1805
|
STEERING WHEEL, 12" DIA. CHROME-PLATED STEEL, NEOPRENE GRIP
|
1
|
| 1806
|
BRAKE PEDAL WITH INTEGRAL MOUTNING BOLT - 5/16-18 X 1-3/4", ZINC PLATED
|
1
|
| 1810
|
CHAIN DEFLECTOR, CHROME
|
1
|
| 1811
|
THROTTLE PEDAL WITH INTEGRAL MOUTNING BOLT - 5/16-18 X 1-3/4", ZINC PLATED
|
1
|
| 1874
|
STEERING SHAFT HARDWARE KIT, LESS SHAFT, WITHOUT PITMAN ARMS
|
1
|
| 2158
|
SPROCKET, STEEL, #35 CHAIN, 4.930" BORE, 6 HOLES, 5.25" BOLT CIRCLE, (P5245) 72 TOOTH
|
1
|
| 2206
|
SPINDLE ONLY, 5/8-18 AXLE X 3-3/4" LENGTH, 5/8" KINGPIN, SIDE #1 (& NYLON INSERTS)
|
1
|
| 2207
|
SPINDLE ONLY, 5/8-18 AXLE X 3-3/4" LENGTH, 5/8" KINGPIN, SIDE #2 (& NYLON INSERTS)
|
1
|
| 2278
|
THROTTLE CONTROL KIT, LESS THROTTLE ROD
|
1
|
| 2279
|
BRAKE CONTROL KIT, LESS BRAKE ROD
|
1
|
| 2552
|
BRAKE ASSEMBLY, 6", WITH DRUM 1" ID HUB WITH SET SCREW & 1/4" KEYWAY SPACER
|
1
|
| 2555
|
UNI-HUB, STEEL, ZINC PLATED, 1" BORE , 1/4" KEYWAY PLUS HARDWARE KIT
|
1
|
| 4318
|
#35 CHAIN, 48" (127 PITCHES), PACKAGED WITH CONNECTING LINK
|
1
|
| 7033
|
410/350 X 5 STUDDED TIRE, 4 PLY, 3.5" WIDE, 11.5" OD
|
2
|
| 7037
|
410/350 X 5 SAWTOOTH TIRE, 4 PLY, 3.5" WIDE, 11.5" OD
|
2
|
| 7132
|
410/350 X 5 INNER TUBE, BENT STEM
|
4
|
| 8140-22
|
STEERING SHAFT, SPLINED, 5/8" OD WITH SNAP RING & WELDED PITMAN ARMS, 22" LENGTH
|
1
|
| 8192
|
BUCKET SEAT WITH MOUNTING HARDWARE ONLY (NO BRACKETS)
|
1
|
| 8193
|
SEAT BRACKET, 19-1/2" CENTERS
|
1
|
| 8194
|
SEAT BRACKET, 18-1/2" CENTERS
|
1
|
| 8211
|
AXLE BEARING, STANDARD, FOR 1" AXLES WITH INTEGRAL LOCKING COLLAR
|
2
|
| 8213
|
FLANGETTE, 3-HOLE, FOR 1" AXLE BEARING, 3" BOLT CIRCLE
|
4
|
| 8216
|
THROTTLE ROD 1/4" OD X 30" LONG, 1/4-28 ROLLED THREAD WITH HOLE, BLACK OXIDE FINISH
|
1
|
| 8218
|
BRAKE ROD 1/4" OD X 40-1/2" LONG, 1/4-28 ROLLED THREAD, BLACK OXIDE FINISH
|
1
|
| 8220
|
ECONOMY ROD END BEARING, FEMALE, 5/16-24 RIGHT
|
4
|
| 8275-11
|
SOLID TIE ROD (TIE ROD ONLY) 5/16-24, 11" LENGTH
|
2
|
| 8302
|
LOCKWASHER, SPLIT, 5/16" ID, ZINC PLATED
|
2
|
| 8328
|
BUSHING/SPACER, NYLON, 13/16" OD, 5/8" ID X 13/16" LENGTH
|
2
|
| 8407
|
BOLT, HEX HEAD, 5/16-18 X 1-3/4", ZINC PLATED
|
5
|
| 8421
|
BOLT, HEX HEAD, 5/16-18 X 3/4", ZINC PLATED
|
3
|
| 8422
|
BOLT, HEX HEAD, 5/16-18 X 1", ZINC PLATED
|
2
|
| 8435
|
KEY, MACHINE, 1/4" X 1/4" X 1-1/4"
|
2
|
| 8447
|
KINGPIN BOLT (HEX HEAD), 5/8-18 X 3-3/4", ZINC PLATED
|
2
|
| 8510
|
LOCKNUT, 5/16-18 THIN, NYLON INSERT, ZINC PLATED
|
12
|
| 8515
|
LOCKNUT/AXLE NUT, 5/8-18 THIN, NYLON INSERT, ZINC PLATED
|
4
|
| 8516
|
LOCKNUT/AXLE NUT, 3/4-16 THIN, NYLON INSERT, ZINC PLATED
|
2
|
| 8523
|
JAM NUT, 5/16-24, RIGHT THREAD, ZINC PLATED
|
4
|
|
|
|
|
|
WARNING: INJURY OR DEATH MAY OCCUR
THESE ARE PARTS ONLY. No representation is made regarding use of these parts for a specific purpose. Customer Assumes All Risk associated from using these parts or operating any device using these parts. Customer is responsible for any and all final design of application and use of these parts. Only persons with proper mechanical training should use these parts
|
IMPORTANT
READ THIS BEFORE ANY ASSEMBLY
Mini-bikes must be operated in accordance with all applicable laws and regulations and riders must comply with all requirements regarding head, eye and body protection. Please check with appropriate government agencies before operating your mini-bike. Prior to any operation, all riders must be properly trained in, and fully knowledgeable of all mini-bike functions and safe operation and procedure. Full compliance with this with all information set forth in these guidelines is mandatory.FAILURE TO FULLY COMPLY IS UNSAFE AND COULD POSSIBLY RESULT IN SERIOUS INJURY OR DEATH.
CHAIN GUARD
WARNING: This kit does NOT contain a Chain Guard. IT IS UNSAFE TO OPERATE A MINI-BIKE WITHOUT A CHAIN GUARD. DO NOT OPERATE WITHOUT A CHAIN GUARD COVERING BOTH SPROCKETS AND THE CHAIN.
ASSEMBLY SAFETY
Assembly should be performed by knowledgeable individuals using appropriate tools. Please consult with your retailer or a Kart or Mini-Bike shop or your local, knowledgeable mechanic if you experience problems with, or have questions about any portion of the assembly process, individual or overall function or operation whatsoever.
CAUTION! COMPRESSED AIR CAN BE DANGEROUS! Containment guards and eye protection should be used when inflating tires. Assemble tires and wheels with care. Never force a tire onto a wheel by prying against the wheel rim. A properly assembled tire will seat itself onto the wheel rim with less than 15 pounds per square inch (psi) of air pressure.
|
|
|
LESS FRAME, Kit includes: 5 in. Aluminum Wheels, Live Axle, 11.5 in. Tires, Single Seat, 6 in. Drum Brake. Add Titan 6.5hp Engine if needed. Perfect for Restoring or Building a Go Kart. EVERYTHING INCLUDED, Use your existing frame.
PARTS INFORMATION
over 21,000 parts
- IDENTIFY YOUR MODEL
This can be one of the biggest challenges in ordering correct parts. If you ordered
your Vehicle from us, we can look-up your records.
- FACTORY PARTS
150/300 TrailMaster, Kandi,
IceBear, Kinroad, Hammerhead,
Roketa
- MINIBIKE PARTS
Manco, Kenbar, Yerf-Dog, Kartco, Carter, Azusa, Taco, Bonanza, Little BadAss, American Racer
- DIRT BIKE PARTS
70, 110, 125, 150, 250cc SSR, Apollo, PitsterPro, Thumpstar, Roketa
- GOKART PARTS
Manco, Kenbar, Kartco, Yerf-Dog, Carter, Azusa, TopKart
- ATV PARTS
110, 125, 150cc, Coolster, Icebear, Trailmaster, Kandi, Kayo
- SCOOTER PARTS
50, 150cc Icebear, BMS, SSR, Znen, Trailmaster
- PERFORMANCE PARTS
150/250/300cc TrailMaster, Kandi, Icebear,
Kinroad, BMS, Roketa, SunL, American Sportworks,
Carter, Dazon
ALL PARTS
see all categories
choose Free Helmet 
Product Reviews
GO KART KITS
LESS FRAME, Kit includes: 5 in. Aluminum Wheels, Live Axle, 11.5 in. Tires, Single Seat, 6 in. Drum Brake. Add Titan 6.5hp Engine if needed. Perfect for Restoring or Building a Go Kart. EVERYTHING INCLUDED, Use your existing frame.
new
65-lbs
/images/products/detail/3551-LF.jpg
Red/Black/Blue
A3551-LF
Kits
|
|