FG02 RGI Go Kart Torque Converter 3/4, #35
Item No: 3925
Brand: RGI
List Price: $189.00
HOLIDAY SALE: $109.00
You Save: $80.00 (42 %)
IN-STOCK
Product Options
* denotes required field
Extra Belt*
GOKART TORQUE CONVERTER
3/4" Bore, #35 Chain, 12 Tooth Sprocket, 2-7hp Engines
The RGI Torque Converter is a low cost alternative, compatible with the GTC TC2 1001 and Comet* TAV2* Torque Converters. It includes a large cast aluminum mounting plate and a FREE COVER, a $29 Value and all other parts needed. Note, the TC2 1001 comes with a smaller billet aluminum mounting plate that may be easier to mount on your gokart or minibike. Our testing showed RGIs performance to be almost as good as the GTC Torque Converters. Scroll down to see all 30 Series Torque Converter kits we offer
DOCUMENTATION:
NOTE: make sure to install the belt with the Flat Side towards the engine. If not, your belt will be shredded within 5 minutes of operation
*Note: COMET* and TAV2* are trademarks of Certified Parts Corporation. GTC Industries is not affiliated or associated with Certified Parts or its products in any way.
Torque Converters dramatically improve Take Off Power, Acceleration, Climbing Ability and Top End Speed on Gokarts, Minibikes and other Small Vehicles. Vehicles currently using a Centrifugal Clutch can easily upgrade to an RGI Torque Converter
|
INCLUDED:
Torque Converter is a complete kit that includes both drive and driven clutches, belt, aluminum engine mounting plate with a built in jackshaft and sprocket, all hardware and installation instructions
FREE Cover Included
ENGINES:
Bolts onto most 2-7hp engines with a 3/4" horizontal shaft including:
-
Briggs
-
Robin
- Tecumseh
- Honda (and clones)
- Kohler
- Clinton
- Lifan
INSTALLATION NOTES: Please download and read the Installation Instructions. The instructions are for the GTC converter but also apply to this RGI converter with all parts interchangeable. Some modifications may be needed to install this torque converter kit on your particular engine. You may need to relocate some components on your engine including the catalytic converter on some models.You will likely have to grind down the rear oil filler cap on a new or newer engine, they are far too long. This RGI FG01 Torque Converter is compatible with the GTC TC2 1002, with the exception that it comes with the large cast aluminum engine mounting plate. The GTC Model comes with the smaller billet aluminum engine mounting plate which makes it easier to install in a smaller space. The optional Engine Mounting Platform can raise the engine sufficiently so as to enable installation of a torque converter if more clearance is needed. Although we provided you with the most common hardware needed for installation on most engines, some engine cases may be threaded differently. If this occurs, you may have to supply the mounting bolts from your local hardware store. If you are replacing a torque converter, this FG01 will simply bolt up. If you are converting from a clutch, please see the GTC Installation Instructions
|
Go Kart Torque Converter, Low Cost Alternative, Includes the cover. 3/4 in. Bore, 12 Teeth, #35 chain, 2-7 HP Engines. Compatible with GTC 1001 and Comet* 218352A TAV2* 30 for Go Kart or Mini Bike. Comes with large size cast aluminum mounting plate
VEHICLE ASSEMBLY Since you are skipping the Dealer and saving over half the retail
cost, you will have some assembly to do.
Vehicles are shipped warehouse direct, in a crate, 95% assembled.
Customer must:
- un-crate
- perform initial vehicle setup
- perform engine oil service
- check and adjust all systems, throttle, brakes
- check and tighten all nuts and bolts
- perform break-in service after 1 hour of operation
- by customer's mechanic at customer's expense
EVEN ON ASSEMBLED UNITS: Initial Vehicle Setup and maintenance must be performed by a qualified mechanic.
Initial Setup can include installing: wheels, seats, roll cage, lights, battery. Break-in Service must be performed after 1 hour of operation and can include: engine oil service, check and tighten all nuts and bolts, check and adjust cables, throttle, brakes, chain and all other systems.
Who can work on my Vehicle? There
may not be many Go Kart or Scooter shops in your area.
- Small Engine Repair Shops
- Garden Equipment Shops
These shops can help with Assembly, Repair or Maintenance. Often times, they
can come to your house.
All Parts are available for online ordering.
All Manuals can be downloaded.
WARRANTY
The Manufacturer Warranty DOES NOT COVER REPAIRS. The
Manufacturer covers parts only and labor is not covered
under any circumstances. Any damaged or missing delivery items will be replaced. The
warranty covers defects in material and workmanship and DOES NOT COVER repairs
or damage
due to operation.
SUPPORTTo request support or initiate a Warranty Claim, please complete a
Help Request
. Parts can be purchased at any time on our website.
Resources
choose a Free Gift or get an Extra Discount
Product Reviews
Engines
Go Kart Torque Converter, Low Cost Alternative, Includes the cover. 3/4 in. Bore, 12 Teeth, #35 chain, 2-7 HP Engines. Compatible with GTC 1001 and Comet* 218352A TAV2* 30 for Go Kart or Mini Bike. Comes with large size cast aluminum mounting plate
new
13-lbs
//gokartsusa.com/images/products/detail/Fengin_Gokart_Torque_Converter.JPG
Red/Black/Blue
FG03 / 218352A
RGI
|
|