Titan TX200S Powersport Engine, Go Kart, Mini Bike

STOCK ENGINE
STOCK ENGINECLUTCH SOLD SEPARATELYTitan on Mini BikeFetty ExhaustStinger Minibike ExhaustStinger ExhaustMikuni with StingerMikuni Carb Stinger
shown for reference only: $199.00
*** THIS PAGE HAS BEEN UPDATED ***

click here to Shop Now

*oops! you have landed on an archived page, shown for reference only
 
TITAN  
    TX200S 196cc

add some Performance Options, TX200S has the Sport Tank. 196cc Powersport Engine, add Mikuni Carb and Fatty or Stinger Exhaust. Recoil Start, Throttle Cable Hookup for Go Kart. additional Performance parts available

Download the  HPO High Performance Option Installation Guide


Select the Stock Engine Only: or add an option 
  • Fatty Exhaust
  • Stinger Exhaust
  • Mikuni Stage 1 w/Fatty
  • Mikuni stage 1 w/Stinger
NOTE: If you are installing this engine on a minibike, this engine is 14" tall. Measure your minibike to make sure it will fit before ordering. If you are ordering this engine for use on one of our minibike kits, there may be an issue whereby the gas cap is difficult to remove. You may need to order and install an external Minibike Gas Tank shown below. This Tank is not needed for installation on a gokart
 
PERFORMANCE: The tons of performance parts available can upgrade this engine to an unbelievable 26 Horsepower!    (see below)
 
 
VIDEO

FEATURES:
  • The engine fits in the minibike and gokarts we sell. Also, gas tank may be removed for installation in a custom minibike frame if you are using a separate gas tank.
  • This engine bolts right onto most go karts and mini bikes without any modifications. *3/4" diameter, 2-7/16" long keyed crankshaft. 14-3/4 Height.
  • Centrifugal Clutches and Torque Converters for 3/4" diameter crankshafts will fit this engine.
  • 4 Tapped bolt holes around crankshaft. Our Torq-A-Verter kits will bolt up to this engine. Chain guards, etc...will also bolt to it.
  • Soft pull starter - less pulling effort required to start.
  • Set up with a throttle hookup and return mechanism not found on utility engines.

NOTE: This engine has a manual choke. The manual choke allows the engine to be started more easily under most conditions

Lawn Mower and Utility Engines from other suppliers may cause you to have unwanted problems such as these:
  • They may not have the proper throttle hookup for the throttle cable
  • The crankshaft may be the wrong length and a standard clutch will not fit
  • The side cover may not have a standard bolt pattern for adding chain guards, Torq-a-Verter kits, etc.
  • It may also be completely under-powered because of the RPM range of the engine

 

Model TX200S
Engine type  4-stroke 25° inclined single cylinder
Bore×Stroke 68mm × 45mm
Displacement 196cc
Compression ratio 8.5/1
Horsepower 6.5HP/3600rpm
Max. Torque 13Nm/2500rpm
lgnition Non-contact transistorized ignition(TCI)
Starter Recoil hand-operated
Air cleaner Semi-dry, oil bath, dual, double silent cyclone
Fuel tank capacity 3.6 L
Fuel consumption 290g/HP-hour
Engine oil capacity 0.6 L
Dimensions
L:12-3/4", W:11.0", H:14-3/4"
Crankshaft: 3/4" x 2-7/16"
Dry weight 35 lbs
 
 
PERFORMANCE PARTS
 Honda GX120/160/200 and clones
 
Upgrade your engine all the way up to 26 horsepower
  • Intake
  • Exhaust
  • Flywheel
  • Carburetor
  • Head
  • Valves
  • Piston
  • Rod

DYNO TESTED

add some Performance Options, TX200S has the Sport Tank. 196cc Powersport Engine, add Mikuni Carb and Fatty or Stinger Exhaust. Recoil Start, Throttle Cable Hookup for Go Kart. additional Performance parts available


PARTS INFORMATION
over 21,000 parts
  • IDENTIFY YOUR MODEL
    This can be one of the biggest challenges in ordering correct parts. If you ordered your Vehicle from us, we can look-up your records.
  • FACTORY PARTS
    150/300 TrailMaster, Kandi, IceBear, Kinroad, Hammerhead, Roketa
  • MINIBIKE PARTS
    Manco, Kenbar, Yerf-Dog, Kartco, Carter, Azusa, Taco, Bonanza, Little BadAss, American Racer
  • DIRT BIKE PARTS
    70, 110, 125, 150, 250cc SSR, Apollo, PitsterPro, Thumpstar, Roketa
  • GOKART PARTS
    Manco, Kenbar, Kartco, Yerf-Dog, Carter, Azusa, TopKart
  • ATV PARTS
    110, 125, 150cc, Coolster, Icebear, Trailmaster, Kandi, Kayo
  • SCOOTER PARTS
    50, 150cc Icebear, BMS, SSR, Znen, Trailmaster
  • PERFORMANCE PARTS
    150/250/300cc TrailMaster, Kandi, Icebear, Kinroad, BMS, Roketa, SunL, American Sportworks, Carter, Dazon


ALL PARTS   see all categories
  GOKART/MINIBIKE PARTS   FACTORY PARTS   PERFORMANCE
  PARTS   TRAILMASTER   BUGGY PARTS
  ENGINES   TRAILMASTER 150/200 ENGINE   150 BUGGY
  TORQUE CONVERTER   KINROAD   150 ENGINE
  GOKART SPEED   TRAILMASTER 300   150 TRANSMISSION
  MINIBIKE SPEED   HAMMERHEAD   250 BUGGY
  TIRES   BUGGY TIRES   ALL TIRES
  WHEELS   BUGGY WHEELS   ALL WHEELS
  ATV PARTS   DIRT BIKE PARTS   SCOOTER PARTS
  ATV PARTS   PIT BIKE 70/110/125/250   SCOOTER PARTS
  ATV TIRES   HONDA CRF50/70   50 SCOOTER
  ATV WHEELS   PIT BIKE ENGINES   150 SCOOTER
  CHINESE BIKE PARTS   HONDA CLONE PARTS   MINI CHOPPER PARTS
  POCKET BIKE -33,36,49cc   TITAN TX200   LITTLE BADASS
  GY6 50/125/150   PREDATOR 212   150 SCOOTER
  DIRT BIKE 50/70/110/125   HONDA GX200   150 SCOOTER
choose Free HelmetSELECT A FREE HELMET

Quantity Discounts

QuantityAmount
2 to 3$197.00
4 to 6$196.00
7 to 9$195.00
10 to 999$193.00
  FREE HELMET   FREE GOGGLES   FREE GLOVES

Product Reviews

(0 Ratings, 0 Reviews)


Engines add some Performance Options, TX200S has the Sport Tank. 196cc Powersport Engine, add Mikuni Carb and Fatty or Stinger Exhaust. Recoil Start, Throttle Cable Hookup for Go Kart. additional Performance parts available new 25-lbs //gokartsusa.com/images/products/detail/titanenginegokartminibike6hp.2.jpg Red/Black/Blue GTX200S Titan

RECOMMENDED PRODUCTS

3/4 in. Centrifugal Clutch Go Kart Mini Bike #35, 13 Tooth
Item No:
shown for reference only: $53.95
2225 Centrifugal Clutch for Go Kart or Mini Bike, #35 chain, 3/4 in. bore, 13-tooth Clutch. Includes Key and Set Screw. High Quality, Heavy Duty, Long Lasting
View 3/4 in. Centrifugal Clutch Go Kart Mini Bike #35, 13 Tooth
Air Filter, High Flow for Mikuni VM22mm Honda GX120/160/200
Item No: G-SB20JR
Archived Listing: $29.95
shown for reference only: $25.87
High Flow Air filter for Mikuni VM 22mm Carburetor. Use on Honda GX120/160/200 including Titan and Predator 212
View Air Filter, High Flow for Mikuni VM22mm Honda GX120/160/200
ARC Rod, Honda GX200 STD OHV, and Titan Engines
Item No:
shown for reference only: $83.94
62XX Billet Rod for Honda GX160, GX200 Engines. Select stock length or a little longer to increase compression with no machining of the block needed. fits the 5.5 and 6.5hp Honda Engines, Titan and Predator. Works great on our Titan Engines MADE-IN-USA
View ARC Rod, Honda GX200 STD OHV, and Titan Engines

PRODUCT SCROLLER >>

  • Mikuni Curved Intake Manifold
    Item No: GL357-7004DM
    ratingratingratingratingrating
    shown for reference only: $59.00
    Mikuni Curved Intake Manifold for mounting the 22mm Mikuni carburetor onto a Honda GX120/160/200, Titan and Predator Engines. It also angles the air filter towards the engine in. ideal position for use on a Mini Bike. MADE-IN-USA
    View Mikuni Curved Intake Manifold
  • Mikuni Carburetor 22mm, for 70/110/125, Honda GX120/160/200, Titan and Predator
    Item No: GVM22-133
    shown for reference only: $124.95
    This 22mm Mikuni carburetor works great on Honda GX160/200 and most 70-125cc Pit Bike engines. adds about 1-2hp and increased torque over stock carb and is fuel mixture adjustable. The 22mm is the right choice if you are running stock valves
    View Mikuni Carburetor 22mm, for 70/110/125, Honda GX120/160/200, Titan and Predator
  • Stage 1 Kit for GoKart or Mini Bike, fits STOCK CARB Honda GX120/160/200, Titan & Predator
    Item No:
    Archived Listing: $169.00
    shown for reference only: $149.95
    for Mini Bike or Go Kart, for STOCK CARBURETOR on your Honda GX120/160/200, Titan or Predator engine. Kit includes: Thru-the-Frame Fatty Exhaust Header, K&N Angled High Flow Air Filter, K&N Pre-Filter, Billet aluminum Intake Adapter, Decals MADE-IN-USA
    View Stage 1 Kit for GoKart or Mini Bike, fits STOCK CARB Honda GX120/160/200, Titan & Predator
  • GX200 Hop-Up Kit, bolt-on Engine Upgrade for STOCK CARB Honda GX160/200, Titan, Predator
    Item No:
    Archived Listing: $199.00
    shown for reference only: $159.00
    Bolt-on Engine Upgrade Kit, bump-up to 11hp for your Honda GX120/160/200 (stock carb) engine including Titan and Predator Engines. Choose your Exhaust, Air Filter, K&N or Standard Angled High Flow Air Filter, K&N Pre-Filter, Intake Adapter + more
    View GX200 Hop-Up Kit, bolt-on Engine Upgrade for STOCK CARB Honda GX160/200, Titan, Predator
  • Mikuni Stage 1 Kit, with Fatty Exhaust, for Mini Bike, Go Kart, GX200, Titan, Predator
    Item No:
    Archived Listing: $299.00
    shown for reference only: $239.00
    fits most Mini Bikes & Karts, 22mm Mikuni Carburetor Kit, fits Honda GX120/160/200, Titan and Predator. Kit includes: Mikuni Curved Intake Manifold, 22mm Mikuni Carb, High Flow Air Filter, Fatty Thru-the-Frame Exhaust Header Pipe. MADE-IN-USA
    View Mikuni Stage 1 Kit, with Fatty Exhaust, for Mini Bike, Go Kart, GX200, Titan, Predator
  • Spark Plug, AR3910X Honda GX120/160/200
    Item No: GAR3910X
    shown for reference only: $11.63
    The AR3910X spark plug is longer. This increases compression and can add as much as 3/4hp. A must have for your Honda GX120/160/200, Titan and Predator. Works great on our Titan Engines
    View Spark Plug, AR3910X Honda GX120/160/200
  • Billet Air intake Adapter, Honda GX160 / GX200 and Titan
    Item No:
    ratingratingratingratingrating
    Archived Listing: $23.99
    shown for reference only: $21.95
    for HONDA STOCK CARB, Billet Aluminum Carb Intake Adapter for installing High Flow Angled Air Filter on your Honda GX160 / GX200 engine. works great on our Titan engines. see option for Predator 212
    View Billet Air intake Adapter, Honda GX160 / GX200 and Titan
  • ARC Air Filter Adapter, Honda GX160/200, Titan and Predator Engines
    Item No:
    shown for reference only: $50.68
    Air Filter Adapter for Stock Carb on Honda GX160 GX200 Engines. Allows the installation of our performance Air Filters. Used by Kart Racers in. the Honda Clone Class. fits the 5.5 and 6.5hp engines Honda and others. Works great on our Titan Engines
    View ARC Air Filter Adapter, Honda GX160/200, Titan and Predator Engines
  • 3/4 in. Centrifugal Clutch, Go Kart Mini Bike #35, 12 Tooth
    Item No:
    shown for reference only: $53.95
    2224 Centrifugal Clutch for Go Kart or Mini Bike, #35 chain, 3/4 in. bore, 12-tooth Clutch. Includes Key and Set Screw. High Quality, Heavy Duty, Long Lasting
    View 3/4 in. Centrifugal Clutch, Go Kart Mini Bike #35, 12 Tooth
  • Flywheel, Billet Honda GX200, Clone & Titan Engines
    Item No: G-6689
    shown for reference only: $122.35
    SFI certified billet aluminum flywheel for Honda GX160, GX200, Titan TX200. The keyway is fixed in. the stock position and the stock pull starter can be used. Weighs 3.5lbs and incorporates a special low drag fan design. MADE-IN-USA
    View Flywheel, Billet Honda GX200, Clone & Titan Engines
  • Stinger Exhaust Header, for Mini Bike or GoKart fits Honda GX200, Titan, Predator
    Item No: GL357-7002PS
    ratingratingratingratingrating
    Archived Listing: $279.00
    shown for reference only: $139.95
    Packed and Tuned, from Little BadAss, fits most Mini Bikes and Go Karts: Stinger Mini Bike Exhaust Header. For Honda GX120/160/200, Titan and Predator. Unbelievable Sound, Performance, Pipe runs thru the frame, engraved billet cap, reinforcement bracket
    View Stinger Exhaust Header, for Mini Bike or GoKart fits Honda GX200, Titan, Predator
  • 1001 GTC TC2 Torque Converter 3/4" #35 for Minibike or Gokart
    Item No:
    ratingratingratingratingrating
    Archived Listing: $249.00
    shown for reference only: $169.00
    1001 TC2. 3/4 in. Bore, 12 Teeth, #35 chain, 2-7 HP Engines. Fully Compatible with Comet* 218352A TAV2* 30 for Go Kart or Mini Bike. GUARANTEED in. STOCK
    View 1001 GTC TC2 Torque Converter 3/4" #35 for Minibike or Gokart
  • Mini Bike Gas Tank, small
    Item No: PFS-129-7
    shown for reference only: $29.95
    External Minibike Gas Tank. Some newer engines, including our Titan engines, are a little taller and it can be difficult to remove the gas cap. This tank solves the problem. Easy installation on our minibike kits. Includes fuel line and attachment straps
    View Mini Bike Gas Tank, small
  • Exhaust Silencer, fits Honda, Titan and Predator
    Item No:
    Archived Listing: $59.00
    shown for reference only: $47.95
    4100 Exhaust Silencer for Honda GX160/200. Installs on RLV 5436C exhaust pipe. works great on our Titan engines
    View Exhaust Silencer, fits Honda, Titan and Predator
  • Exhaust Header, for Honda GX120/160/200, Titan TX200, Predator 212
    Item No:
    Archived Listing: $79.00
    shown for reference only: $69.00
    5436C Honda GX200 Exhaust Curved Header exhaust pipe will wake up your Honda GX120/160/200. Get on the throttle with this bolted on your motor and prepare for instant RPMs and acceleration. works great on our Titan and Predator
    View Exhaust Header, for Honda GX120/160/200, Titan TX200, Predator 212
  • Box Stock Engine Kit for Go Kart, Honda GX160/200 and Titan
    Item No:
    shown for reference only: $129.95
    used by Kart Racers in. the Honda Class. Kit includes: Angled Air Filter, Billet Adapter, Chain Guard / Heat Shield, Engine Top Plate, Walbro Fuel Pump, Pulse Fitting, Fuel Line, Throttle Linkage and more. Works great on Titan and Predator Engines
    View Box Stock Engine Kit for Go Kart, Honda GX160/200 and Titan
  • Carburetor Main Jets, for Honda GX120 GX160 GX200, Titan and Predator
    Item No:
    shown for reference only: $10.63
    Stock Carburetor Main Jets, for Honda GX120 GX160 GX200, Titan and Predator. When you upgrade your intake and exhaust, you will need to re-jet your carb. The main jet is easily replaceable. Choose from sizes 034, 035, 036 or 037
    View Carburetor Main Jets, for Honda GX120 GX160 GX200, Titan and Predator
  • 3/4 in. Centrifugal Clutch, Extreme-Duty for Go Kart Mini Bike #35, 12T
    Item No: G-LD4S-5L
    Archived Listing: $59.00
    shown for reference only: $46.44
    Extreme-Duty Centrifugal Clutch for Go Kart or Mini Bike, #35 chain, 3/4 in. bore, 12-tooth Clutch. Includes Key and Set Screw. High Quality, Heavy Duty, Long Lasting. rated at up to 13hp
    View 3/4 in. Centrifugal Clutch, Extreme-Duty for Go Kart Mini Bike #35, 12T
  • TX249 Engine Mounting Platform, Billet Honda GX160 / GX200
    Item No: GTX249
    Archived Listing: $69.00
    shown for reference only: $48.06
    Billet Aluminum Engine Mount raises the engine to enable installation of a Torque Converter on a Mini Bike or Go Kart. fits 2-7hp engines, Honda GX160 / GX200, Titan TX200, Predator 212, Tecumseh, Subaru, Briggs, Kohler, works great on our Titan engines
    View TX249 Engine Mounting Platform, Billet Honda GX160 / GX200
  • 3/4 in. Centrifugal Clutch, Extreme-Duty Go Kart Mini Bike #40/41, 10T
    Item No: G-LD4S-4L
    Archived Listing: $126.00
    shown for reference only: $75.55
    Extreme-Duty Centrifugal Clutch for Go Kart or Mini Bike, #40/41 chain, 3/4 in. bore, 10-tooth Clutch. Includes Key and Set Screw. High Quality, Heavy Duty, Long Lasting. rated at up to 13hp
    View 3/4 in. Centrifugal Clutch, Extreme-Duty Go Kart Mini Bike #40/41, 10T
  • Gasket Set, for Honda GX160, GX200, Titan and Clone
    Item No: GTX160200.01
    shown for reference only: $33.99
    Stock Gasket Set for Honda GX160 5.5hp, GX200 6.5hp engines, fits our Titan TX160 5.5hp, TX200 6.5hp Engines, and BSP clones.
    View Gasket Set, for Honda GX160, GX200, Titan and Clone
  • Engine Top Plate/Throttle Mechanism, Honda GX200, Predator & "Hemi"
    Item No:
    shown for reference only: $53.20
    Top plate/throttle mechanism is CNC machined from 1/8" aluminum plate so you know it looks great. The integrated throttle mechanism is adjustable to maximize foot pedal travel giving you more precise throttle control. Honda GX120/160/200, Titan, Predator
    View Engine Top Plate/Throttle Mechanism, Honda GX200, Predator & "Hemi"
  • Briggs Animal Racing Engine
    Item No: G124332-8003-01
    Archived Listing: $699.00
    shown for reference only: $649.00
    Briggs Animal Racing Engine. The latest approach in. engineering, manufacturing, and testing to design from the ground-up, a dedicated RACING engine. in. addition, every engine is hand-built by master engine technicians. sealed at the factory, race ready
    View Briggs Animal Racing Engine
  • Locking Collar, Honda, Titan & Predator
    Item No: R-FAS6580
    Archived Listing: $9.50
    shown for reference only: $7.75
    Stainless Steel Locking Collar fastens the 4100 Silencer to the 5436C exhaust pipe for use on your Honda, Titan and Predator engine. Works great on our Titan engines
    View Locking Collar, Honda, Titan & Predator
  • K&N High Flow Air Filter, for Race Kart Honda GX120/160/200, Titan TX200, Predator
    Item No:
    Archived Listing: $51.00
    shown for reference only: $47.95
    for HONDA STOCK CARB, GENUINE K&N Go Kart Air Intake kit. optional Billet Aluminum Carb Intake Adapter, Genuine K&N High Flow Angled Air Filter and mounting Clamp for your Honda GX120/160/200 engine, for stock carb. works great on our Titan engines
    View K&N High Flow Air Filter, for Race Kart Honda GX120/160/200, Titan TX200, Predator
  • Angled Air Filter, for Honda GX120/160/200 and others, High Flow
    Item No:
    ratingratingratingratingrating
    Archived Listing: $29.95
    shown for reference only: $23.71
    for HONDA STOCK CARB, Air Intake kit includes optional Billet Aluminum Carb Intake Adapter, Angled Air Filter and mounting Clamp for your Honda GX120/160/200, for stock carb. works great on our Titan engines
    View Angled Air Filter, for Honda GX120/160/200 and others, High Flow
  • Valve Springs, 10.8lb, Stage 1, Honda GX120/160/200, Titan and Predator Engines
    Item No: GDJ-1055HD
    shown for reference only: $25.95
    DJ-1055HD Valve Springs for Honda GX160 and GX200 , Titan and Predator Engines. superior in. every way to the old trick springs fits the 5.5 and 6.5hp engines Honda and Titan. Works great on our Titan Engines
    View Valve Springs, 10.8lb, Stage 1, Honda GX120/160/200, Titan and Predator Engines