Parts Kit, for Little BadAss 357 Mini Bike, 5 in. Wheels, Less Frame

Mini Bike Parts Kit, for 357, Taco 22
shown for reference only: $287.00
*** THIS PAGE HAS BEEN UPDATED ***

click here to Shop Now

*oops! you have landed on an archived page, shown for reference only
Product Options

* denotes required field

Clutch Options*
Clutch Cover*
357 MINIBIKE PARTS KIT
Add this Parts Kit to your 357 Frame to complete your build. (frame not included)
If you are building or restoring a Taco 22 minibike, these parts will fit
add a 12 tooth clutch for a faster take off. Select the 13 tooth clutch for more top end speed. Clutch Cover sold separately

Click Add-to-Cart, then scroll down to the bottom of this page to add an engine if needed.

INCLUDED IN THIS KIT:
  • 5" Aluminum Tristar Wheels (2)
  • Front Tire: 4.10 x 3.50 x 5" - Sawtooth
  • Rear Tire: 4.10 x 3.50 x 5" - Knobby
  • Inner tubes (2)
  • Wheel Bearings (4)
  • 60 tooth Sprocket
  • 35 Chain & Master Link
  • Throttle Assembly with Cable
  • Front Axle
  • Rear Axle
  • Wheel Spacers (4)
  • Pleated Seat
  • Clutch (optional)
  • Clutch Cover (optional)
 
357 MINIBIKE PARTS KIT
 *minibikes are not for use on public roadways
WARNING: INJURY OR DEATH MAY OCCUR
THESE ARE PARTS ONLY. No representation is made regarding use of these parts for a specific purpose. Customer Assumes All Risk associated from using these parts or operating any device using these parts. Customer is responsible for any and all final design of application and use of these parts. Only persons with proper mechanical training should use these parts

IMPORTANT

READ THIS BEFORE ANY ASSEMBLY

Mini-bikes must be operated in accordance with all applicable laws and regulations and riders must comply with all requirements regarding head, eye and body protection. Please check with appropriate government agencies before operating your mini-bike. Prior to any operation, all riders must be properly trained in, and fully knowledgeable of all mini-bike functions and safe operation and procedure. Full compliance with this with all information set forth in these guidelines is mandatory.FAILURE TO FULLY COMPLY IS UNSAFE AND COULD POSSIBLY RESULT IN SERIOUS INJURY OR DEATH.


CHAIN GUARD

WARNING: This kit does NOT contain a Chain Guard. IT IS UNSAFE TO OPERATE A MINI-BIKE WITHOUT A CHAIN GUARD. DO NOT OPERATE WITHOUT A CHAIN GUARD COVERING BOTH SPROCKETS AND THE CHAIN.


ASSEMBLY SAFETY

Assembly should be performed by knowledgeable individuals using appropriate tools. Please consult with your retailer or a Kart or Mini-Bike shop or your local, knowledgeable mechanic if you experience problems with, or have questions about any portion of the assembly process, individual or overall function or operation whatsoever.

CAUTION! COMPRESSED AIR CAN BE DANGEROUS! ­Containment guards and eye protection should be used when inflating tires. Assemble tires and wheels with care. Never force a tire onto a wheel by prying against the wheel rim. A properly assembled tire will seat itself onto the wheel rim with less than 15 pounds per square inch (psi) of air pressure.

 
If you are building or restoring a Taco 22 minibike, these parts will fit
add a 12 tooth clutch for a faster take off. Select the 13 tooth clutch for more top end speed. Clutch Cover sold separately

Click Add-to-Cart, then scroll down to the bottom of this page to add an engine if needed.

INCLUDED IN THIS KIT:
  • 5" Aluminum Tristar Wheels (2)
  • Front Tire: 4.10 x 3.50 x 5" - Sawtooth
  • Rear Tire: 4.10 x 3.50 x 5" - Knobby
  • Inner tubes (2)
  • Wheel Bearings (4)
  • 60 tooth Sprocket
  • 35 Chain & Master Link
  • Throttle Assembly with Cable
  • Front Axle
  • Rear Axle
  • Wheel Spacers (4)
  • Pleated Seat
  • Clutch (optional)
  • Clutch Cover (optional)
 
 *minibikes are not for use on public roadways
WARNING: INJURY OR DEATH MAY OCCUR
THESE ARE PARTS ONLY. No representation is made regarding use of these parts for a specific purpose. Customer Assumes All Risk associated from using these parts or operating any device using these parts. Customer is responsible for any and all final design of application and use of these parts. Only persons with proper mechanical training should use these parts

IMPORTANT

READ THIS BEFORE ANY ASSEMBLY

Mini-bikes must be operated in accordance with all applicable laws and regulations and riders must comply with all requirements regarding head, eye and body protection. Please check with appropriate government agencies before operating your mini-bike. Prior to any operation, all riders must be properly trained in, and fully knowledgeable of all mini-bike functions and safe operation and procedure. Full compliance with this with all information set forth in these guidelines is mandatory.FAILURE TO FULLY COMPLY IS UNSAFE AND COULD POSSIBLY RESULT IN SERIOUS INJURY OR DEATH.


CHAIN GUARD

WARNING: This kit does NOT contain a Chain Guard. IT IS UNSAFE TO OPERATE A MINI-BIKE WITHOUT A CHAIN GUARD. DO NOT OPERATE WITHOUT A CHAIN GUARD COVERING BOTH SPROCKETS AND THE CHAIN.


ASSEMBLY SAFETY

Assembly should be performed by knowledgeable individuals using appropriate tools. Please consult with your retailer or a Kart or Mini-Bike shop or your local, knowledgeable mechanic if you experience problems with, or have questions about any portion of the assembly process, individual or overall function or operation whatsoever.

CAUTION! COMPRESSED AIR CAN BE DANGEROUS! ­Containment guards and eye protection should be used when inflating tires. Assemble tires and wheels with care. Never force a tire onto a wheel by prying against the wheel rim. A properly assembled tire will seat itself onto the wheel rim with less than 15 pounds per square inch (psi) of air pressure.