Little BadAss Minichopper, Drag Bike 26hp
 Little BadAss Minichopper, Drag Bike Little BadAss Minichopper, Drag Bike   Pearl White Frame, 14" Spoke Wheel, Disc Brake Little BadAss Minichopper GTC Torque Converter, Little BadAss Minichopper       Little BadAss™ Mini Motorcycles Dale Earnhart Jr on his LBA Grave Digger Paul and Tina on Little BadAss Minichopper  Hooters Girls on Little BadAss Minichopper Willie Nelson on Little BadAss Minichopper           |
Item No: 7346
Brand: Little BadAss
In Stock
SPECIAL ORDER
Product Options
* denotes required field
Frame*
ENGINE*
Extra Drag Clutch*
Delivery*
Little BadAss Drag Bike
26hp Predator 212 Crate Motor, CLOSED COURSE COMPETITION only, JR DRAGBIKE. 8" Rear, 14" Front Wheel, 33mm Fat Forks.
The Bike comes with a GTC Torque Converter. You can optionally add an extra Drag Clutch which you can quickly swap out for racing. Mikuni Inverted Carb, Shotgun Exhaust included. MADE IN USA
- Frame: Standard Black or optional Pearl White
- Forks: Fatty 33mm Tubes, 44mm lowers
- 14" Spoke Front Wheel
- Brake: Front Hydraulic Disc, Rear Drum
- *Predator 212 Crate Engine with Recoil Start, Gov/Oil removed, Billet Rod, Billet Flywheel, 28lb Valve Train, Long Drop Cam, Fuel Pump, Mikuni Carburetor 22mm with chrome Inverted Intake, K&N Filter and Pre-filter, Shotgun Exhaust Header, GTC Torque Converter with Open Primary Cover.
- Drag bar not Included
Engine upgrades: Titan TX200, Honda GX160, JR Drag Motor
shown with a Predator Crate Motor
|
|
| Dale Earnhart Receives his LBA
|
Grave Digger Paul & Tina's LBA
|
|
|
| Hooters LBA
|
Willie Nelson
|
|
|
| Little Brother
|
Hooters Gir
|
WARNING: INJURY OR DEATH MAY OCCUR
THESE ARE PARTS ONLY. No representation is made regarding use of these parts for a specific purpose. Customer Assumes All Risk associated from using these parts or operating any device using these parts. Customer is responsible for any and all final design of application and use of these parts. Only persons with proper mechanical training should use these parts
|
IMPORTANT
READ THIS BEFORE ANY ASSEMBLY
Mini-bikes must be operated in accordance with all applicable laws and regulations and riders must comply with all requirements regarding head, eye and body protection. Please check with appropriate government agencies before operating your mini-bike. Prior to any operation, all riders must be properly trained in, and fully knowledgeable of all mini-bike functions and safe operation and procedure. Full compliance with this with all information set forth in these guidelines is mandatory.FAILURE TO FULLY COMPLY IS UNSAFE AND COULD POSSIBLY RESULT IN SERIOUS INJURY OR DEATH.
CHAIN GUARD
WARNING: This kit does NOT contain a Chain Guard. IT IS UNSAFE TO OPERATE A MINI-BIKE WITHOUT A CHAIN GUARD. DO NOT OPERATE WITHOUT A CHAIN GUARD COVERING BOTH SPROCKETS AND THE CHAIN.
ASSEMBLY SAFETY
Assembly should be performed by knowledgeable individuals using appropriate tools. Please consult with your retailer or a Kart or Mini-Bike shop or your local, knowledgeable mechanic if you experience problems with, or have questions about any portion of the assembly process, individual or overall function or operation whatsoever.
CAUTION! COMPRESSED AIR CAN BE DANGEROUS! Containment guards and eye protection should be used when inflating tires. Assemble tires and wheels with care. Never force a tire onto a wheel by prying against the wheel rim. A properly assembled tire will seat itself onto the wheel rim with less than 15 pounds per square inch (psi) of air pressure.
|
26hp Predator 212 Crate Motor, CLOSED COURSE COMPETITION only, JR DRAGBIKE. 8 in. Rear, 14 in. Front Wheel, 33mm Fat Forks, GTC Torque Converter, Mikuni Inverted Carb, Shotgun Exhaust. MADE in. USA
VEHICLE ASSEMBLY
Since you are skipping the Dealer and saving over half the retail
cost, you will have some assembly to do.
Vehicles are shipped warehouse direct, in a crate, 95% assembled.
Customer must:
- un-crate
- perform initial vehicle setup
- perform engine oil service
- check and adjust all systems, throttle, brakes
- check and tighten all nuts and bolts
- perform break-in service after 1 hour of operation
- by customer's mechanic at customer's expense
EVEN ON ASSEMBLED UNITS: Initial Vehicle Setup and maintenance must be performed by a qualified mechanic.
Initial Setup can include installing: wheels, seats, roll cage, lights, battery. Break-in Service must be performed after 1 hour of operation and can include: engine oil service, check and tighten all nuts and bolts, check and adjust cables, throttle, brakes, chain and all other systems.
Who can work on my Vehicle?
There
may not be many Go Kart or Scooter shops in your area.
- Small Engine Repair Shops
- Garden Equipment Shops
These shops can help with Assembly, Repair or Maintenance. Often times, they
can come to your house.
All Parts are available for online ordering.
All Manuals can be downloaded.
WARRANTY
The Manufacturer Warranty DOES NOT COVER REPAIRS. The
Manufacturer covers parts only and labor is not covered
under any circumstances. Any damaged or missing delivery items will be replaced. The
warranty covers defects in material and workmanship and DOES NOT COVER repairs
or damage
due to operation.
SUPPORTTo request support or initiate a Warranty Claim, please complete a
Help Request
. Parts can be purchased at any time on our website.
Resources
choose a Free Gift or get an Extra Discount 
Product Reviews
LITTLE BADASS
26hp Predator 212 Crate Motor, CLOSED COURSE COMPETITION only, JR DRAGBIKE. 8 in. Rear, 14 in. Front Wheel, 33mm Fat Forks, GTC Torque Converter, Mikuni Inverted Carb, Shotgun Exhaust. MADE in. USA
new
120-lbs
/images/products/detail/Little_BadAss_Mini_Motorcycle_3389.JPG
Red/Black/Blue
LBA1065
Little BadAss
Item No:
Styled after the Sportster Peanut Tank. Gas Tank Cover for Little Badass® Mini Chopper
|
Item No:
List Price: $295.00
MEGA SALE: $239.95
You Save: $55.05 (19 %)
Torque Converter (Big Plate) for the Little BadAss® Minichopper. GTC 1002-LBA TC2 3/4 in. Bore, 10 Teeth, #40/41 chain, Easy to install on your Honda GX160/200, Titan, Predator. Triples Power, and Speed. also fits American Flyer 215 Mini Bikes
|
Item No:
List Price: $239.95
MEGA SALE: $169.95
You Save: $70.00 (29 %)
CHROME Shotgun Exhaust Header. Adds AMAZING HP, awesome sound, for Little BadAss® Mini Chopper and other Mini Bikes, routes the pipe to the oposite side of the engine, fits Honda GX120/160/200, Titan TX200, Predator 212 and other brands
|
Item No: GL1065-A10151
List Price: $67.95
MEGA SALE: $54.92
You Save: $13.03 (19 %)
Chopper Front Wheel, 10 in. Chrome Plated, (2) Bearings included. fits 5/8 in. Axle.
|
|
|
|