Mini Bike Gas Tank, small


Item No: 1813
Brand: Hoca
ORDER NOW: $29.95
This item is not returnable

Use Code MEGA

 

Get a Free Gift or Extra Discount
GAS TANK 
  MINIBIKE
  • 2 Mount Holes
  • Length: 6 inches
  • Width: 4 inches
  • Height: 3.5 inches

 
External Minibike Gas Tank kit. Some of the newer engines are a little taller and it can be difficult to remove the gas cap. This tank solves the problem. No need to remove the existing tank from the engine. Easy installation on our minibike kits. Includes fuel line and attachment straps. NOTE: Sorry, Black is not available at this time, your Tank will be white with a black gas cap
 
NOTE:  Most of the newer engines now have a larger gas tank and a much taller gas cap due to EPA requirements. On a Minibike, this can make it difficult or impossible to remove the gas cap. If you are ordering one of our minibike kits (Road Rocket, 3540, 3541 or 3544) we recommend installing this Minibike Gas Tank for use with our Titan Engines. This Tank is not needed on a gokart
 
Mounting: Drill an extra hole in the seat mount bracket. Fasten tank with screw. Install fuel line. Also can be installed in front of the seat with a couple of zip ties.

Can also be installed under the front frame bars with zip ties and fuel line supplied with this kit

External Minibike Gas Tank. Some newer engines, including our Titan engines, are a little taller and it can be difficult to remove the gas cap. This tank solves the problem. Easy installation on our minibike kits. Includes fuel line and attachment straps


VEHICLE ASSEMBLY
Since you are skipping the Dealer and saving over half the retail cost, you will have some assembly to do.

Vehicles are shipped warehouse direct, in a crate, 95% assembled.

Customer must:

  • un-crate
  • perform initial vehicle setup
  • perform engine oil service
  • check and adjust all systems, throttle, brakes
  • check and tighten all nuts and bolts
  • perform break-in service after 1 hour of operation
  • by customer's mechanic at customer's expense

EVEN ON ASSEMBLED UNITS: Initial Vehicle Setup and maintenance must be performed by a qualified mechanic.

Initial Setup can include installing: wheels, seats, roll cage, lights, battery. Break-in Service must be performed after 1 hour of operation and can include: engine oil service, check and tighten all nuts and bolts, check and adjust cables, throttle, brakes, chain and all other systems.

Who can work on my Vehicle?
There may not be many Go Kart or Scooter shops in your area.

  • Small Engine Repair Shops
  • Garden Equipment Shops

These shops can help with Assembly, Repair or Maintenance. Often times, they can come to your house.

All Parts are available for online ordering.

All Manuals can be downloaded.  

WARRANTY

The Manufacturer Warranty DOES NOT COVER REPAIRS. The Manufacturer covers parts only and labor is not covered under any circumstances. Any damaged or missing delivery items will be replaced. The warranty covers defects in material and workmanship and DOES NOT COVER repairs or damage due to operation.

SUPPORT

To request support or initiate a Warranty Claim, please complete a Help Request . Parts can be purchased at any time on our website.
 


Resources
  EXTENDED WARRANTY   HELP REQUEST   DOCUMENTATION
  GOKART & MINIBIKE PARTS   ALL PARTS   TRAILMASTER PARTS
choose a Free Gift or get an Extra DiscountSELECT A FREE GIFT
  FREE HELMET   FREE GOGGLES   FREE GLOVES

Product Reviews

(0 Ratings, 0 Reviews)


Engines External Minibike Gas Tank. Some newer engines, including our Titan engines, are a little taller and it can be difficult to remove the gas cap. This tank solves the problem. Easy installation on our minibike kits. Includes fuel line and attachment straps new 1-lbs //gokartsusa.com/images/products/detail/Smallgastankwhite02.jpg Red/Black/Blue PFS-129-7 Hoca

PRODUCT SCROLLER >>

  • Mikuni Curved Intake Manifold
    Item No: GL357-7004DM
    ratingratingratingratingrating
    ORDER NOW: $59.00
    Mikuni Curved Intake Manifold for mounting the 22mm Mikuni carburetor onto a Honda GX120/160/200, Titan and Predator Engines. It also angles the air filter towards the engine in. ideal position for use on a Mini Bike. MADE-IN-USA
    View Mikuni Curved Intake Manifold
  • Mikuni Carburetor 22mm, for 70/110/125, Honda GX120/160/200, Titan and Predator
    Item No: GVM22-133
    ORDER NOW: $124.95
    This 22mm Mikuni carburetor works great on Honda GX160/200 and most 70-125cc Pit Bike engines. adds about 1-2hp and increased torque over stock carb and is fuel mixture adjustable. The 22mm is the right choice if you are running stock valves
    View Mikuni Carburetor 22mm, for 70/110/125, Honda GX120/160/200, Titan and Predator
  • Stage 1 Kit for GoKart or Mini Bike, fits STOCK CARB Honda GX120/160/200, Titan & Predator
    Item No:
    List Price: $169.00
    ORDER NOW: $149.95
    You Save: $19.05 (11 %)
    for Mini Bike or Go Kart, for STOCK CARBURETOR on your Honda GX120/160/200, Titan or Predator engine. Kit includes: Thru-the-Frame Fatty Exhaust Header, K&N Angled High Flow Air Filter, K&N Pre-Filter, Billet aluminum Intake Adapter, Decals MADE-IN-USA
    View Stage 1 Kit for GoKart or Mini Bike, fits STOCK CARB Honda GX120/160/200, Titan & Predator
  • Mikuni Stage 1 Kit, with Fatty Exhaust, for Mini Bike, Go Kart, GX200, Titan, Predator
    Item No:
    List Price: $299.00
    ORDER NOW: $239.00
    You Save: $60.00 (20 %)
    fits most Mini Bikes & Karts, 22mm Mikuni Carburetor Kit, fits Honda GX120/160/200, Titan and Predator. Kit includes: Mikuni Curved Intake Manifold, 22mm Mikuni Carb, High Flow Air Filter, Fatty Thru-the-Frame Exhaust Header Pipe. MADE-IN-USA
    View Mikuni Stage 1 Kit, with Fatty Exhaust, for Mini Bike, Go Kart, GX200, Titan, Predator
  • Predator 212 6.5hp Powersport Engine, Go Kart, Mini Bike
    Item No: GPR212
    ORDER NOW: $299.00
    Stock Engime, Predator 212 Engine 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine, Go Kart Mini Bike. CARB Approved for sale in. California
    View Predator 212 6.5hp Powersport Engine, Go Kart, Mini Bike
  • Spark Plug, AR3910X Honda GX120/160/200
    Item No: GAR3910X
    ORDER NOW: $11.63
    The AR3910X spark plug is longer. This increases compression and can add as much as 3/4hp. A must have for your Honda GX120/160/200, Titan and Predator. Works great on our Titan Engines
    View Spark Plug, AR3910X Honda GX120/160/200
  • Billet Air intake Adapter, Honda GX160 / GX200 and Titan
    Item No:
    ratingratingratingratingrating
    List Price: $23.99
    ORDER NOW: $21.95
    You Save: $2.04 (9 %)
    for HONDA STOCK CARB, Billet Aluminum Carb Intake Adapter for installing High Flow Angled Air Filter on your Honda GX160 / GX200 engine. works great on our Titan engines. see option for Predator 212
    View Billet Air intake Adapter, Honda GX160 / GX200 and Titan
  • ARC Air Filter Adapter, Honda GX160/200, Titan and Predator Engines
    Item No:
    ORDER NOW: $50.68
    Air Filter Adapter for Stock Carb on Honda GX160 GX200 Engines. Allows the installation of our performance Air Filters. Used by Kart Racers in. the Honda Clone Class. fits the 5.5 and 6.5hp engines Honda and others. Works great on our Titan Engines
    View ARC Air Filter Adapter, Honda GX160/200, Titan and Predator Engines
  • 1-1/4 inch Fatty Exhaust Header, for Mini Bike Go Kart Honda GX160/200, Titan, Predator
    Item No:
    ratingratingratingratingrating
    List Price: $99.00
    ORDER NOW: $79.95
    You Save: $19.05 (19 %)
    Fatty Mini Bike Exhaust Header fits Honda GX120/160/200, Titan + Predator. This trick exhaust curves to run the pipe thru the frame and out of the way. Awesome sound and performance. A MUST HAVE exhaust for just about any bike or kart MADE-IN-USA
    View 1-1/4 inch Fatty Exhaust Header, for Mini Bike Go Kart Honda GX160/200, Titan, Predator
  • Flywheel, Billet Honda GX200, Clone & Titan Engines
    Item No: G-6689
    ORDER NOW: $122.35
    SFI certified billet aluminum flywheel for Honda GX160, GX200, Titan TX200. The keyway is fixed in. the stock position and the stock pull starter can be used. Weighs 3.5lbs and incorporates a special low drag fan design. MADE-IN-USA
    View Flywheel, Billet Honda GX200, Clone & Titan Engines
  • Stinger Exhaust Header, for Mini Bike or GoKart fits Honda GX200, Titan, Predator
    Item No: GL357-7002PS
    ratingratingratingratingrating
    List Price: $279.00
    ORDER NOW: $139.95
    You Save: $139.05 (50 %)
    Packed and Tuned, from Little BadAss, fits most Mini Bikes and Go Karts: Stinger Mini Bike Exhaust Header. For Honda GX120/160/200, Titan and Predator. Unbelievable Sound, Performance, Pipe runs thru the frame, engraved billet cap, reinforcement bracket
    View Stinger Exhaust Header, for Mini Bike or GoKart fits Honda GX200, Titan, Predator
  • Air Filter, High Flow for Mikuni VM22mm Honda GX120/160/200
    Item No: G-SB20JR
    List Price: $29.95
    ORDER NOW: $25.87
    You Save: $4.08 (14 %)
    High Flow Air filter for Mikuni VM 22mm Carburetor. Use on Honda GX120/160/200 including Titan and Predator 212
    View Air Filter, High Flow for Mikuni VM22mm Honda GX120/160/200
  • Superbox Exhaust, Honda GX160 / GX200, Clone and Predator
    Item No:
    ORDER NOW: $47.95
    AKRA legal Super Box Exhaust muffled header. Fits Honda GX120/160/200, Titan and Predator. Works great on our Titan Engines. 1.0625 in. OD , .930 in. ID , 22 in. long. Add a B91 stock muffler
    View Superbox Exhaust, Honda GX160 / GX200, Clone and Predator
  • Exhaust Header, for Honda GX120/160/200, Titan TX200, Predator 212
    Item No:
    List Price: $79.00
    ORDER NOW: $69.00
    You Save: $10.00 (13 %)
    5436C Honda GX200 Exhaust Curved Header exhaust pipe will wake up your Honda GX120/160/200. Get on the throttle with this bolted on your motor and prepare for instant RPMs and acceleration. works great on our Titan and Predator
    View Exhaust Header, for Honda GX120/160/200, Titan TX200, Predator 212
  • Astro Build-a-Wheel 6 inch, for Mini Bike
    Item No:
    ORDER NOW: $79.70
    Configure Astro Wheel with a #35 60T Sprocket, Brake & Tire. Split rim for easy tire mounting. Beautiful cast-aluminum design. 3" wide. With 5/8" ID bearings. Use 410/350x6 or 530/450x6 tire. Use 1816 Adapter kit to mount Sprocket and Brake to this wheel
    View Astro Build-a-Wheel 6 inch, for Mini Bike
  • Box Stock Engine Kit for Go Kart, Honda GX160/200 and Titan
    Item No:
    ORDER NOW: $129.95
    used by Kart Racers in. the Honda Class. Kit includes: Angled Air Filter, Billet Adapter, Chain Guard / Heat Shield, Engine Top Plate, Walbro Fuel Pump, Pulse Fitting, Fuel Line, Throttle Linkage and more. Works great on Titan and Predator Engines
    View Box Stock Engine Kit for Go Kart, Honda GX160/200 and Titan
  • Mikuni Carb Kit, for Honda GX120/160/200, Titan and Predator
    Item No:
    List Price: $230.00
    ORDER NOW: $189.95
    You Save: $40.05 (17 %)
    Mini Bike, Go Kart Upgrade GX200 Engine to Mikuni Carburetor, Easy Bolt-On Kit Includes: Intake Manifold, 22mm Mikuni Clone Carb, High Flow Air Filter | fits Honda GX200, Titan, and Predator 212
    View Mikuni Carb Kit, for Honda GX120/160/200, Titan and Predator
  • K&N Value Pack, Go Kart Mini Bike Honda GX160/200, Titan and Predator
    Item No:
    List Price: $295.00
    ORDER NOW: $244.00
    You Save: $51.00 (17 %)
    Value Pack(for Stock Carb) Honda GX120/160/GX200, Titan or Predator, Includes everything in. the K&N Stage 1 kit PLUS: Spark Plug, 18lb Valve Springs and Carb Jet Kit. see Installation instructions
    View K&N Value Pack, Go Kart Mini Bike Honda GX160/200, Titan and Predator
  • Competition Stick-on Numbers, 7 in. Black 3/PK
    Item No:
    ORDER NOW: $3.51
    Competition Stick-on Numbers, 7 in. Black 3/PK choose your numbers: 0123456789. Cool Fat size Numbers for Kart Racing, Dirt Bike etc. Fit perfect on our Mini Bike Number Plate
    View Competition Stick-on Numbers, 7 in. Black 3/PK
  • Carburetor Main Jets, for Honda GX120 GX160 GX200, Titan and Predator
    Item No:
    ORDER NOW: $10.63
    Stock Carburetor Main Jets, for Honda GX120 GX160 GX200, Titan and Predator. When you upgrade your intake and exhaust, you will need to re-jet your carb. The main jet is easily replaceable. Choose from sizes 034, 035, 036 or 037
    View Carburetor Main Jets, for Honda GX120 GX160 GX200, Titan and Predator
  • Team Geico Honda Decal Kit
    Item No: W-862-10114
    ORDER NOW: $43.46
    Honda 12" X 18" Decal Kit
    View Team Geico Honda Decal Kit
  • Gasket Set, for Honda GX160, GX200, Titan and Clone
    Item No: GTX160200.01
    ORDER NOW: $33.99
    Stock Gasket Set for Honda GX160 5.5hp, GX200 6.5hp engines, fits our Titan TX160 5.5hp, TX200 6.5hp Engines, and BSP clones.
    View Gasket Set, for Honda GX160, GX200, Titan and Clone
  • Engine Top Plate/Throttle Mechanism, Honda GX200, Predator & "Hemi"
    Item No:
    ORDER NOW: $53.20
    Top plate/throttle mechanism is CNC machined from 1/8" aluminum plate so you know it looks great. The integrated throttle mechanism is adjustable to maximize foot pedal travel giving you more precise throttle control. Honda GX120/160/200, Titan, Predator
    View Engine Top Plate/Throttle Mechanism, Honda GX200, Predator & "Hemi"
  • Fuel Line, Transparent, for Mini Bike, Go Kart 1/4 in. x 3 feet
    Item No:
    List Price: $25.00
    ORDER NOW: $23.73
    You Save: $1.27 (5 %)
    Premium Fuel Line, See thru, choose your color, fits Mikuni carburetor for Honda GX, Titan, and Predator Engines, most Mini Bikes and Go Karts. 1/4 in. ID, 3/8 in. OD, 3 foot length
    View Fuel Line, Transparent, for Mini Bike, Go Kart 1/4 in. x 3 feet
  • Pre-Filter, K&N for Race Kart Honda GX160 / GX200, Titan and Predator
    Item No:
    ORDER NOW: $29.00
    Pre-Filter, GENUINE K&N with white lettering, fits the Genuine K&N High Flow Angled Air Filter and standard Angled Air Filter for the Honda GX120/160/200, Titan TX200, Predator 212. Also fits the Mikuni Air Filter
    View Pre-Filter, K&N for Race Kart Honda GX160 / GX200, Titan and Predator
  • UNI Air Filter, for Honda GX120/160/200 Go Kart Mini Bike
    Item No:
    List Price: $34.95
    ORDER NOW: $30.11
    You Save: $4.84 (14 %)
    for Stock Carb, UNI Air Intake kit, with optional Billet Aluminum Carb Adapter, UNI Air Filter and mounting Clamp for your Honda GX120/160/200, for Stock Carb. works great on our Titan engines
    View UNI Air Filter, for Honda GX120/160/200 Go Kart Mini Bike
  • K&N High Flow Air Filter, for Race Kart Honda GX120/160/200, Titan TX200, Predator
    Item No:
    List Price: $51.00
    ORDER NOW: $47.95
    You Save: $3.05 (6 %)
    for HONDA STOCK CARB, GENUINE K&N Go Kart Air Intake kit. optional Billet Aluminum Carb Intake Adapter, Genuine K&N High Flow Angled Air Filter and mounting Clamp for your Honda GX120/160/200 engine, for stock carb. works great on our Titan engines
    View K&N High Flow Air Filter, for Race Kart Honda GX120/160/200, Titan TX200, Predator
  • Number Plate, Rectangular Class C Plate white 10x12
    Item No: W65-0989
    ORDER NOW: $33.99
    Number Plate, Rectangular Class C Plate. use 7 in. Number Stickers (sold separately) on this number plate for your Dirt Bike, Go kart or whatever. 10x12in
    View Number Plate, Rectangular Class C Plate white 10x12
  • Angled Air Filter, for Honda GX120/160/200 and others, High Flow
    Item No:
    ratingratingratingratingrating
    List Price: $29.95
    ORDER NOW: $23.71
    You Save: $6.24 (21 %)
    for HONDA STOCK CARB, Air Intake kit includes optional Billet Aluminum Carb Intake Adapter, Angled Air Filter and mounting Clamp for your Honda GX120/160/200, for stock carb. works great on our Titan engines
    View Angled Air Filter, for Honda GX120/160/200 and others, High Flow
  • Valve Springs, 10.8lb, Stage 1, Honda GX120/160/200, Titan and Predator Engines
    Item No: GDJ-1055HD
    ORDER NOW: $25.95
    DJ-1055HD Valve Springs for Honda GX160 and GX200 , Titan and Predator Engines. superior in. every way to the old trick springs fits the 5.5 and 6.5hp engines Honda and Titan. Works great on our Titan Engines
    View Valve Springs, 10.8lb, Stage 1, Honda GX120/160/200, Titan and Predator Engines