Home
MOTOR PACKAGE, for Little BadAss Mini Chopper
 MOTOR PACKAGE, for Little BadAss Mini Chopper MOTOR PACKAGE, for Little BadAss Mini Chopper       |
shown for reference only: $209.00
*** THIS PAGE HAS BEEN UPDATED ***
click here to Shop Now
*oops! you have landed on an archived page, shown for reference only
Product Options
* denotes required field
ENGINE*
BLACK THUNDER TX200 ENGINE
compatible with Honda GX160/200 MINIBIKE / MINICHOPPER
exhaust can be sold in California
SELECT ENGINE in Product Options above. Price will adjust
Add Options:
* torque converter cover sold separately. click here to see the cover. the gas tank cover shown in photo is not included with this kit
BUILDER NOTES: A lot of people think that they must install a big heavy 1" crankshaft motor to get 11 or 13hp. NOT TRUE. The smaller 5.5 and 6.5hp engines are much smaller, lighter and can be SUBSTANTIALLY upgraded up to 26hp. Bolt-on upgrades like the Inverted Intake, Mikuni Carb alone bump you up to about 10-11hp, add the Shotgun Exhaust and the bump in hp goes up. Couple that with the amazing performance of the GTC Torque Converter. if you need maximum hp for competition, the builder prepared kit can be installed. you will need a drag bar.
*minibike parts are sold as a novelty items, not for use on public roadways
WARNING: INJURY OR DEATH MAY OCCUR
THESE ARE PARTS ONLY. No representation is made regarding use of these parts for a specific purpose. Customer Assumes All Risk associated from using these parts or operating any device using these parts. Customer is responsible for any and all final design of application and use of these parts. Only persons with proper mechanical training should use these parts
|
IMPORTANT
READ THIS BEFORE ANY ASSEMBLY
Mini-bikes must be operated in accordance with all applicable laws and regulations and riders must comply with all requirements regarding head, eye and body protection. Please check with appropriate government agencies before operating your mini-bike. Prior to any operation, all riders must be properly trained in, and fully knowledgeable of all mini-bike functions and safe operation and procedure. Full compliance with this with all information set forth in these guidelines is mandatory.FAILURE TO FULLY COMPLY IS UNSAFE AND COULD POSSIBLY RESULT IN SERIOUS INJURY OR DEATH.
CHAIN GUARD
WARNING: This kit does NOT contain a Chain Guard. IT IS UNSAFE TO OPERATE A MINI-BIKE WITHOUT A CHAIN GUARD. DO NOT OPERATE WITHOUT A CHAIN GUARD COVERING BOTH SPROCKETS AND THE CHAIN.
ASSEMBLY SAFETY
Assembly should be performed by knowledgeable individuals using appropriate tools. Please consult with your retailer or a Kart or Mini-Bike shop or your local, knowledgeable mechanic if you experience problems with, or have questions about any portion of the assembly process, individual or overall function or operation whatsoever.
CAUTION! COMPRESSED AIR CAN BE DANGEROUS! Containment guards and eye protection should be used when inflating tires. Assemble tires and wheels with care. Never force a tire onto a wheel by prying against the wheel rim. A properly assembled tire will seat itself onto the wheel rim with less than 15 pounds per square inch (psi) of air pressure.
|
Disclaimer: Performance Parts affect the reliability of your go kart and are designed for racing purposes only. Some machining and/or modifications may be necessary to install performance parts on your particular go kart. Improper installation by an untrained mechanic can result in serious injury of death. Any damages, direct or incidental to a rider or property due to the installation of any performance parts are the responsibility of the purchaser. GokartsUSA makes no warranty as to performance parts, express or implied, including, but not limited to any implied warranties of merchantability or fitness for a particular purpose. Performance parts are not returnable for any reason. The logos and trademarks of each respective manufacturer belong to each manufacturer and they do not endorse or promote GokartsUSA in any way. GokartsUSA does not make any claim to represent or be endorsed by any of these manufacturers. All performance parts are not road legal! Closed circuit, off-road race, or exhibition use only!
|
Special Edition Engine, for Little BadAss Mini Chopper or amy Mini Bike, add Options: Mikuni Inverted Intake Manifold, 22mm Mikuni Carb, High Flow Air Filter, Shotgun Exhaust, GTC Torque Converter. assembly required. compatible with Honda GX160/200
PARTS INFORMATION
over 21,000 parts
- IDENTIFY YOUR MODEL
This can be one of the biggest challenges in ordering correct parts. If you ordered
your Vehicle from us, we can look-up your records.
- FACTORY PARTS
150/300 TrailMaster, Kandi,
IceBear, Kinroad, Hammerhead,
Roketa
- MINIBIKE PARTS
Manco, Kenbar, Yerf-Dog, Kartco, Carter, Azusa, Taco, Bonanza, Little BadAss, American Racer
- DIRT BIKE PARTS
70, 110, 125, 150, 250cc SSR, Apollo, PitsterPro, Thumpstar, Roketa
- GOKART PARTS
Manco, Kenbar, Kartco, Yerf-Dog, Carter, Azusa, TopKart
- ATV PARTS
110, 125, 150cc, Coolster, Icebear, Trailmaster, Kandi, Kayo
- SCOOTER PARTS
50, 150cc Icebear, BMS, SSR, Znen, Trailmaster
- PERFORMANCE PARTS
150/250/300cc TrailMaster, Kandi, Icebear,
Kinroad, BMS, Roketa, SunL, American Sportworks,
Carter, Dazon
ALL PARTS
see all categories
choose Free Helmet 
Product Reviews
HONDA GX PARTS
Special Edition Engine, for Little BadAss Mini Chopper or amy Mini Bike, add Options: Mikuni Inverted Intake Manifold, 22mm Mikuni Carb, High Flow Air Filter, Shotgun Exhaust, GTC Torque Converter. assembly required. compatible with Honda GX160/200
new
65-lbs
//gokartsusa.com/images/products/detail/BlackThunderTX160.jpg
Red/Black/Blue
GL1065-5011
Little BadAss
|
|