Raw Racer II 80cc Bicycle Gas Engine Kit
The Raw Racer engine kit has always been a popular choice for the motorized bike enthusiasts and racers. With its durability and reliability, it has always been an easy choice. But now, the Raw Racer is making a big come back.
Introducing the all new Raw Racer II. It now comes with a bigger piston for a ton of torque and huge performance boost. Plus, it is very durable and affordable. This will easily become another favorite in the motorized bicycle community.
NOTE: Top end assembly required for this engine kit.
What's new?
50mm bore single piece cylinder/head (increased weight capacity, lower operating temps, easier starting, sustained power output across varied rpm range)
High performance speed carburetor
Silver anti-corrosion coating
High performance CDI with Yamaha components
Improved magneto
High end allen bolts
Improved gas cap
This bike motor kit includes:
Raw Racer II 80cc Engine Slant Head - 3HP+P
Friction Clutch; Pedal Start
Magneto With Solid State CDI Ignition
44 Tooth, 9 Hole Chrome Sprocket
3 Plate Sprocket Kit
2.0 Liter Fuel Tank, Tear Drop Shape (Black Color)
Chrome Muffler
NT Carburetor
Push Button Clutch Lever And Cable
Twist Throttle With Engine Kill Switch
Improved Gas Valve
Fuel Line #2
Idler Pulley Chain Tensioner with Bearings
Improved NT Carburetor
Chrome Lined Cylinder Wall
Head With Center Fire Spark Plug
202 Crankcase Bearings
Needle Bearings On Piston Wrist Pin
Improved 415 Chain
Chain Guard
Tool Kit
All The Mounting Brackets, Gaskets, And Hardware Including Nylon Locking Nuts
Universal Motor Mount
Complete User Manual
6-Month Limited Warranty Included - FREE
Stainless steel allen bolts
Better balanced crank
Upgraded bearings / 60% thicker crank case around bearings
Stuffed crank case
Large intake port (40mm bolt hole width)
Round exhaust port
40mm crank stroke (more powerful, efficient, and reliable)
Type B piston (high wrist pin)
Long rod (89mm)
Larger 8mm x 1.25 engine mount studs
Bicycle Requirements:
This bicycle motor engine kit fits most Men's 24" and larger bicycles which includes mountain, cruiser, chopper and road bikes with a V-frame with at least a 8.5" height clearance for the engine. Larger frame size requires drilling into bike frame and use of the universal face plate.
Dimensions:
This 80cc bicycle motor engine kit is about 8.5" height 7" length 5" width and fits on most standard 24” – 26” or 25mm 29mm frame bicycle frame tubes. Larger frame size requires drilling into bike frame and use the universal face plate. This engine kit only adds about 20 lbs to your bike.
Our gasoline operated products are NOT compliant with Environmental Protection Agency ( E.P.A. ) or California Air Resources Board (C.A.R.B) for the use on/off Public roads. Upon purchase, the buyer agrees to use products for racing (closed-course competition) only and NOT for on/off public roads.
The Raw Racer engine kit has always been a popular choice for the motorized bike enthusiasts and racers. With its durability and reliability, it has always been an easy choice. But now, the Raw Racer is making a big come back.
VEHICLE ASSEMBLY
Since you are skipping the Dealer and saving over half the retail
cost, you will have some assembly to do.
Vehicles are shipped warehouse direct, in a crate, 95% assembled.
Customer must:
- un-crate
- perform initial vehicle setup
- perform engine oil service
- check and adjust all systems, throttle, brakes
- check and tighten all nuts and bolts
- perform break-in service after 1 hour of operation
- by customer's mechanic at customer's expense
EVEN ON ASSEMBLED UNITS: Initial Vehicle Setup and maintenance must be performed by a qualified mechanic.
Initial Setup can include installing: wheels, seats, roll cage, lights, battery. Break-in Service must be performed after 1 hour of operation and can include: engine oil service, check and tighten all nuts and bolts, check and adjust cables, throttle, brakes, chain and all other systems.
Who can work on my Vehicle?
There
may not be many Go Kart or Scooter shops in your area.
- Small Engine Repair Shops
- Garden Equipment Shops
These shops can help with Assembly, Repair or Maintenance. Often times, they
can come to your house.
All Parts are available for online ordering.
All Manuals can be downloaded.
WARRANTY
The Manufacturer Warranty DOES NOT COVER REPAIRS. The
Manufacturer covers parts only and labor is not covered
under any circumstances. Any damaged or missing delivery items will be replaced. The
warranty covers defects in material and workmanship and DOES NOT COVER repairs
or damage
due to operation.
SUPPORT
To request support or initiate a Warranty Claim, please complete a
Help Request
. Parts can be purchased at any time on our website.
Resources