GY6 125-150cc 32mm Performance CVK Carburetor
 Performance CVK 32mm Carburetor 125-300cc   |
Item No: 1196
Brand: Hoca
IN-STOCK
Product Options
* denotes required field
Recommended Intake Manifold*
Performance CVK 32mm Carburetor
for GY6 125cc and 150cc Engines (No Automatic choke for added performance)
Used on buggies, full-size street legal scooters and ATVs
Most stock air intakes and mufflers restrict air flow. This can lead to a significant loss of power. Adding a 32mm performance carburetor can further improve intake and add even more power. This greatly improves the airflow over the stock carburetor.
NOTE: This is NOT a ready-to-install kit! This is Not a stock replacement carb. Additional parts and/or modifications may be required to install this carburetor on your particular vehicle. see tech notes below before ordering this carburetor.
Fits all of the following GY6 125cc and 150cc engines:
Avanti, Baja, Baotian, Baron, Bashan, Boss, Bravo, CFMoto, Diamo, Dotera, Honda, JM Star Tomahawk II, Kazuma, Kymco, Lifan, Qingqi, Redcat, Roketa, Schwinn, Strada, SUNL, Tank, Terminator, Various unlisted makes/models, Vento, Verucci, Wildfire, X-Treme, Yamati , YongKang. Specify Engine type above
Manual Choke
Choke Cable Not Included
Outer Diameter (Air Filter Side): 50mm
Outer Diameter (Intake Side): 38mm
Inner Diameter (Intake Side): 32mm
Tech Notes:
CVK 32mm KEIHIN racing 125-300cc. 32mm NARAKU CVK CARB UPGRADE BIG BORE. Item Nr.: NK200.02 EAN/UPC: 4250362410580 CVK carburetor NARAKU Racing 32mm for 125-300cc engines. It is a Keihin CVK carburetor made in Japan. Intended only for racing! The distance of the intake port is 37mm, 50mm filter side. Particularly interesting for cars, not an assembly whose design permits higher carburetor. The throttle cable is laid sideways at the carburetor, so they do not interfere with helmet compartment or under construction. The height is roughly equivalent to the original carburetor. Please check before ordering, if the carburetor can be used on the vehicle. This is not ready to install kit. It has a different air filters are used and / or installed a different intake manifold and the original piece can be modified. Connection widths note! HD nozzle sizes = 138 ND = 60. Parts for scooters with 150cc, 170cc, 200cc, 250cc upgraded ATVs, Buggies, Scooters and more. Many applications on GY6 QMI152 QMI157 QMJ152 QMJ157 CN250 CF250 4-stroke engines.
Disclaimer: Performance Parts affect the reliability of your go kart and are designed for racing purposes only. Some machining and/or modifications may be necessary to install performance parts on your particular go kart. Manufacturers make modifications to their products from time to time and models may differ from year to year. The above specified models serve as a guideline only. Improper installation by an untrained mechanic can result in serious injury of death. Any damages, direct or incidental to a rider or property due to the installation of any performance parts are the responsibility of the purchaser. GokartsUSA makes no warranty as to performance parts, express or implied, including, but not limited to any implied warranties of merchantability or fitness for a particular purpose. Performance parts are not returnable for any reason. The logos and trademarks of each respective manufacturer belong to each manufacturer and they do not endorse or promote GokartsUSA in any way. GokartsUSA does not make any claim to represent or be endorsed by any of these manufacturers. All performance parts are not road legal! Closed circuit, off-road race, or exhibition use only!
Performance CVK Carburetor Type-2 for 150cc and 125cc GY6 4-stroke engines found on full-size street legal scooters, ATVs and off-road karts.
VEHICLE ASSEMBLY
Since you are skipping the Dealer and saving over half the retail
cost, you will have some assembly to do.
Vehicles are shipped warehouse direct, in a crate, 95% assembled.
Customer must:
- un-crate
- perform initial vehicle setup
- perform engine oil service
- check and adjust all systems, throttle, brakes
- check and tighten all nuts and bolts
- perform break-in service after 1 hour of operation
- by customer's mechanic at customer's expense
EVEN ON ASSEMBLED UNITS: Initial Vehicle Setup and maintenance must be performed by a qualified mechanic.
Initial Setup can include installing: wheels, seats, roll cage, lights, battery. Break-in Service must be performed after 1 hour of operation and can include: engine oil service, check and tighten all nuts and bolts, check and adjust cables, throttle, brakes, chain and all other systems.
Who can work on my Vehicle?
There
may not be many Go Kart or Scooter shops in your area.
- Small Engine Repair Shops
- Garden Equipment Shops
These shops can help with Assembly, Repair or Maintenance. Often times, they
can come to your house.
All Parts are available for online ordering.
All Manuals can be downloaded.
WARRANTY
The Manufacturer Warranty DOES NOT COVER REPAIRS. The
Manufacturer covers parts only and labor is not covered
under any circumstances. Any damaged or missing delivery items will be replaced. The
warranty covers defects in material and workmanship and DOES NOT COVER repairs
or damage
due to operation.
SUPPORTTo request support or initiate a Warranty Claim, please complete a
Help Request
. Parts can be purchased at any time on our website.
Resources
choose a Free Gift or get an Extra Discount 
BUGGY 150 Performance
Performance CVK Carburetor Type-2 for 150cc and 125cc GY6 4-stroke engines found on full-size street legal scooters, ATVs and off-road karts.
new
7-lbs
//gokartsusa.com/images/products/detail/RPNK200_02alt1.jpg
Red/Black/Blue
G114-33PS
Hoca
|
|