150/250 Performance CDI (DC), for Buggy Go Kart

Performance CDI, 150 250 Performance
Item No: 5292
Brand: Naraku
List Price: $149.00
HALLOWEEN SALE: $81.40
You Save: $67.60 (45 %)
In Stock
Apply for Financing Text Now for Special Deal
Product Options

* denotes required field

Buggy Model*
250 Performance DC CDI 
  for GY6150 and CN250 Buggies,  No Rev Limitter,    DC Voltage
 

The stock CDI restricts the maximum RPM causing a significant loss of power
 
The stock CDIs on all buggies have a rev limiter that restricts rpm to about 5500. This Performance CDI has NO Rev Limiter and allows engines to achieve up to 9500 rpm. It also advances timing as the rpm increases to max out performance. Keep in mind that while this CDI will allow higher rpm, the CDI alone does not increase the rpms. The CDI works in conjunction with other installed upgrades to achieve performance. 
 
for TrailMaster and other buggies with DC Voltage, GY6 150 Go Kart and Scooters. Enables up to 9500 RPMs for a dramatic boost in performance. The stock CDI restricts the max RPM causing a significant loss of power

Unplug and pull your stock CDI out. Carefully compare the connector plug to the picture to make sure it matches exactly. the pins should be facing the same way as on your stock CDI. 

Fits all of the following GY6 150cc engines with DC Voltage:
TrailMaster, Roketa, Kandi, Blade, BMS, SunL, Tank, Honda, Kazuma, Hammerhead, Tomberlin and many more
 
 
  • 6 Pin Connection, 2/4 Split
  • Length: 3.7 inches
  • Width: 2 inches
  • Height: 1.25 inches
  • Wire Length (including plug): 5 inches
  • Voltage: DC

for TrailMaster, Kandi, BMS and other Buggies with DC Voltage, GY6 150 Go Kart and Scooters. Enables up to 9500 RPMs for a dramatic boost in. performance. The stock CDI restricts the max RPM causing a significant loss of power


VEHICLE ASSEMBLY
Since you are skipping the Dealer and saving over half the retail cost, you will have some assembly to do.

Vehicles are shipped warehouse direct, in a crate, 95% assembled.

Customer must:

  • un-crate
  • perform initial vehicle setup
  • perform engine oil service
  • check and adjust all systems, throttle, brakes
  • check and tighten all nuts and bolts
  • perform break-in service after 1 hour of operation
  • by customer's mechanic at customer's expense

EVEN ON ASSEMBLED UNITS: Initial Vehicle Setup and maintenance must be performed by a qualified mechanic.

Initial Setup can include installing: wheels, seats, roll cage, lights, battery. Break-in Service must be performed after 1 hour of operation and can include: engine oil service, check and tighten all nuts and bolts, check and adjust cables, throttle, brakes, chain and all other systems.

Who can work on my Vehicle?
There may not be many Go Kart or Scooter shops in your area.

  • Small Engine Repair Shops
  • Garden Equipment Shops

These shops can help with Assembly, Repair or Maintenance. Often times, they can come to your house.

All Parts are available for online ordering.

All Manuals can be downloaded.  

WARRANTY

The Manufacturer Warranty DOES NOT COVER REPAIRS. The Manufacturer covers parts only and labor is not covered under any circumstances. Any damaged or missing delivery items will be replaced. The warranty covers defects in material and workmanship and DOES NOT COVER repairs or damage due to operation.

SUPPORT

To request support or initiate a Warranty Claim, please complete a Help Request . Parts can be purchased at any time on our website.
 


Resources
  EXTENDED WARRANTY   HELP REQUEST   DOCUMENTATION
  GOKART & MINIBIKE PARTS   ALL PARTS   TRAILMASTER PARTS
choose a Free Gift or get an Extra DiscountSELECT A FREE GIFT
  FREE HELMET   FREE GOGGLES   FREE GLOVES

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)


BUGGY Speed for TrailMaster, Kandi, BMS and other Buggies with DC Voltage, GY6 150 Go Kart and Scooters. Enables up to 9500 RPMs for a dramatic boost in. performance. The stock CDI restricts the max RPM causing a significant loss of power new 3-lbs /images/products/detail/GokartsUSA_CDI_TrailMaster_169144.1.jpg Red/Black/Blue PS169-144 Naraku

PRODUCT SCROLLER >>

  • High Output Coil GY6 150
    Item No: W609-0726
    List Price: $79.95
    HALLOWEEN SALE: $47.95
    You Save: $32.00 (40 %)
    High Performance upgrade ignition coil for the GY6 50-150cc 4-Stroke Engines. This coil is designed to improve overall reliability and performance and is the number one choice from dealers across the nation.
    View High Output Coil GY6 150
  • CDI, for 150/250cc Buggy
    Item No:
    HALLOWEEN SALE: $65.90
    If your unit is not starting, does not produce spark, misfiring and/or running rough it could very well be your CDI box. Our quality internals ensure that when you replace your CDI you will be improving your ride to get the reliability you deserve.
    View CDI, for 150/250cc Buggy
  • Uni Clamp-On Dual Layer inPod in. Filter, Straight, for GY6 150
    Item No:
    List Price: $29.95
    HALLOWEEN SALE: $27.49
    You Save: $2.46 (8 %)
    STRAIGHT Genuine Uni Air Filter for your Buggy, 2-Stage Pod Style, for GY6 150 Buggy Engines. fits all Keihin Carburetors 24mm to 32mm
    View Uni Clamp-On Dual Layer  inPod in. Filter, Straight,  for GY6 150
  • Uni Clamp-On Dual Layer inPod in. Filter, Angled for GY6 150
    Item No:
    List Price: $29.95
    HALLOWEEN SALE: $27.49
    You Save: $2.46 (8 %)
    ANGLED Genuine Uni Air Filter for your Buggy, 2-Stage Pod Style, for GY6 150 Buggy Engines. fits all Keihin Carburetors 24mm to 32mm
    View Uni Clamp-On Dual Layer  inPod in. Filter, Angled for GY6 150
  • 150 Performance CDI (DC), for Buggy Go Kart 2010 and later
    Item No:
    HALLOWEEN SALE: $97.79
    for Buggies with DC Voltage, QMI/QMJ 152/157 GY6 150 Go Kart and Scooters. Enables up to 9500 RPMs for a dramatic boost in. performance. The stock CDI restricts the max RPM causing a significant loss of power
    View 150 Performance CDI (DC), for Buggy Go Kart 2010 and later
  • CFMoto 250cc Buggy Carburetor, 30mm
    Item No:
    List Price: $199.97
    HALLOWEEN SALE: $181.47
    You Save: $18.50 (9 %)
    30mm Carburetor Assembly for 250cc 4-stroke water-cooled 172mm engines. CFmoto V3/V5
    View CFMoto 250cc Buggy Carburetor, 30mm
  • Carburetor OKO GY6 125-150cc CVK 30MM AUTOMATIC CHOKE
    Item No:
    List Price: $239.00
    HALLOWEEN SALE: $197.95
    You Save: $41.05 (17 %)
    OKO 30mm High Performance, After-Market CVK Carburetor for 150cc and 125cc GY6 4-stroke engines found on full-size street legal scooters, ATVs and off-road karts.
    View Carburetor OKO GY6 125-150cc CVK 30MM AUTOMATIC CHOKE
  • 32mm Performance Intake Manifold for GY6 150
    Item No: GN-MP-07072
    List Price: $79.00
    HALLOWEEN SALE: $65.00
    You Save: $14.00 (18 %)
    Aluminum Intake Manifold for GY6 125-150cc. Fits wide range from 24mm to 32mm carbs. Includes Rubber Gasket, Coupling, and Clamps to attach to your carb. Rubber intake manifolds can become brittle and crack. Great for 30mm and 32mm performance carburetors
    View 32mm Performance Intake Manifold for GY6 150
  • GY6 125-150cc Stock Carburetor, 24mm
    Item No: PS164-49
    HALLOWEEN SALE: $97.35
    GY6 125-150cc Stock OEM Carburetor, 24mm.
    View GY6 125-150cc Stock Carburetor, 24mm
  • GY6 125-150cc 32mm Performance CVK Carburetor
    Item No:
    List Price: $279.00
    HALLOWEEN SALE: $207.87
    You Save: $71.13 (25 %)
    Performance CVK Carburetor Type-2 for 150cc and 125cc GY6 4-stroke engines found on full-size street legal scooters, ATVs and off-road karts.
    View GY6 125-150cc 32mm Performance CVK Carburetor
  • Main Jets, for Keihin Carburetor
    Item No: G-Keihin Jets
    List Price: $7.95
    HALLOWEEN SALE: $3.95
    You Save: $4.00 (50 %)
    Carburetor Main Jets. Keihin Carburetors 24mm to 32mm are found on almost all GY6 150 and CN250 Dune Buggy Engines.
    View Main Jets, for Keihin Carburetor
  • FREE GIFTS