Home
Road Rocket Mini Bike kit, 8" wheels

Road Rocket Mini Bike kit |
shown for reference only: $659.00
*** THIS PAGE HAS BEEN UPDATED ***
click here to Shop Now
*oops! you have landed on an archived page, shown for reference only
Product Options
* denotes required field
Chain Guard*
Clutch Options*
Kickstand*
Fenders*
made in USA since 1960.
EVERYTHING INCLUDED: Except Engine and Clutch.
INCLUDED: Frame, Fork, 8 in. Aluminum Wheels, Tires, Innertubes, Drum Brake , Brake Lever, Brake Cable, 72T Sprocket, #35 Chain, Throttle Controls, Padded Seat and all Hardware.
Add Engine and Clutch to complete kit
the video is not of this kit! It's shown as a great example of what you can do with our minibike parts and kits. Good Job!
Painting and Assembly Required Assembly Manual
This is the original Mini Bike made since 1960
Remember the Old School Minibikes of the 60s? Like Taco, Bonanza and Rupp? MINIBIKE WARNING
Those of you who grew up in the 60’s remember Minibikes as a wonderful part of childhood. Boy's who were fortunate enough to own one couldn't wait to get out of school and go down to the local field to ride.
SPECS:
- Will accept a 2 to 6hp Engine
- 4 1/2" Internal Expanding Brake
- 72T Sprocket / Brake Drum Combo
- 8" Aluminum Split Rim Mag style Wheels
- 4 Bearings, 2 each wheel
- Front tire: 4.10 x 3.50 x 8" - Sawtooth
- Rear tire: 4.10 x 3.50 x 8" - Knobby
- Front and Rear Innertubes
- Front & Rear Axles
- #35 chain with master link
- Deluxe Throttle Control, Grips and Cable
- Brake Lever and Cable
- Deluxe Padded Seat
- Hardware Kit
- Low cost, High Quality, MADE-IN-USA
- Rugged Construction
- Ready to paint and assemble with basic hand tools
CLUTCH
You will need to select a Clutch for your Mini Bike in Product Options above.The 12 tooth clutch will give you a faster take off and lower gearing for climbing hills. The 13 tooth clutch will give you more top end speed
ENGINE
Engine Sold Separately. The Mini Bike Kit does not include an Engine unless you add one. After adding this Mini Bike Kit to your cart, you can add an engine and clutch.
Honda, Titan and Predator 6hp engines all fit this frame, the Titan Engine has the throttle cable adapter setup for mini bikes and go karts. Not just any engine will work.
GAS TANK: Most of the newer engines now have a larger gas tank and a much taller gas cap due to EPA requirements. On a Minibike, this can make it difficult or impossible to remove the gas cap. The Titan engine comes with a side-fill gas tank for easy fueling, and is also approved for California.
You may also install an external Minibike Gas Tank. Our 7 and 11" Cylindrical gas tanks can be mounted on the minibike or directly on the engine. The stock gas tank can be relocated and mounted on the frame in front of the seat using heavy duty zip ties..
Honda GX and Predator engines may be a bit difficult to fuel due to the center mounted gas cap. The Titan engine solves this problem with a side-fill Gas Tank. This is not an issue on a Go kart
*minibike parts are sold as a novelty items, not for use on public roadways
THESE ARE PARTS ONLY. No representation is made regarding use of these parts for a specific purpose. Customer Assumes All Risk associated from using these parts or operating any device using these parts. Customer is responsible for any and all final design of application and use of these parts. Only persons with proper mechanical training should use these parts.
|
EVERYTHING INCLUDED: Frame, Fork, 8" Aluminum Wheels, Tires, Innertubes, Drum Brake , Brake Lever, Brake Cable, 72T Sprocket, Chain, Throttle Controls, Padded Seat and all Hardware. Add Engine to complete kit.
PARTS INFORMATION over 21,000 parts
- IDENTIFY YOUR MODEL
This can be one of the biggest challenges in ordering correct parts. If you ordered
your Vehicle from us, we can look-up your records.
- FACTORY PARTS
150/300 TrailMaster, Kandi,
IceBear, Kinroad, Hammerhead,
Roketa
- MINIBIKE PARTS
Manco, Kenbar, Yerf-Dog, Kartco, Carter, Azusa, Taco, Bonanza, Little BadAss, American Racer
- DIRT BIKE PARTS
70, 110, 125, 150, 250cc SSR, Apollo, PitsterPro, Thumpstar, Roketa
- GOKART PARTS
Manco, Kenbar, Kartco, Yerf-Dog, Carter, Azusa, TopKart
- ATV PARTS
110, 125, 150cc, Coolster, Icebear, Trailmaster, Kandi, Kayo
- SCOOTER PARTS
50, 150cc Icebear, BMS, SSR, Znen, Trailmaster
- PERFORMANCE PARTS
150/250/300cc TrailMaster, Kandi, Icebear,
Kinroad, BMS, Roketa, SunL, American Sportworks,
Carter, Dazon
ALL PARTS
see all categories
choose Free Helmet
Quantity Discounts
Quantity | Amount |
2 to 3 | $657.00 |
4 to 6 | $656.00 |
7 to 9 | $655.00 |
10 to 999 | $653.00 |
Product Reviews
(2 Ratings, 2 Reviews) |
Average Rating:
|
We Love It!!!
Ron Zilligan
(Miami, FL)
9/25/2009 4:32 PM
We are just having tons of fun. It was very easy to build. We put it together in 2 afternoons. We got the fame powdercoated purple. It looks great. You have to drill mounting holes for the fenders but they really look cool. We got the chrome fenders. The Robin 6hp is a little screamer! We tweeked the governor (shhh) and now its hitting 50+ mph. After seeing mine, my neighbor got one too.
|
Happy Happy
Anonymous
(Unknown)
1/21/2008 1:16 PM
We just got our Road Rocket and love it. It's very well made and we like that it's made in the USA. Thanks, Jerry
|
KITS
EVERYTHING INCLUDED: Frame, Fork, 8" Aluminum Wheels, Tires, Innertubes, Drum Brake , Brake Lever, Brake Cable, 72T Sprocket, Chain, Throttle Controls, Padded Seat and all Hardware. Add Engine to complete kit.
new
90-lbs
//gokartsusa.com/images/products/detail/Mini_Bike_Kit_8_inch_wheels_22.jpg
Red/Black/Blue
A3542
Azusa
|
|